1986-92 Mazda RX-7 Performance Parts : Clutch/Pressure Plate

 : Clutch/Pressure Plate : Transmission Throwout Bearing 79-88 - 12A & 13B 6 Port

Transmission Throwout Bearing
79-88 - 12A & 13B 6 Port

Part Number: 12612

Price: $30.79

Qty:

Transmission Throwout Bearing - 79-88 - 12A & 13B 6 Port - Detail 1

Addtional Photos - Select to Enlarge

Facebook Share

Transmission Throwout Bearing
79-88 - 12A & 13B 6 Port

The original throwout bearing normally does not require replacement unless it has been abused in some way. However, if it has been making noise, such as a whirring sound when the clutch pedal is depressed, or if the slave linkage has run out of clearance, replacement is wise. Any roughness felt in the bearing after it is removed is cause for replacement. Our throwout bearing is a Mazda OEM part.

Genuine Mazda PartGenuine Mazda Part.

Customers who bought the above item also often bought:

Transmission Seal Kit - 79-88 Non-Turbo

Transmission Seal Kit - 79-88 Non-Turbo

We recommend replacing the transmission front seal and rear seal kit when re-installing the transmission to reduce the risk of leakage. The primary reason for leaks seems to be the large loads that are placed on the input shaft when re-installing... Transmission Seal Kit - 79-88 Non-Turbo

Sport/Race 4-Puck Clutch Disc - 83-92 RX-7 N/T

Sport/Race 4-Puck Clutch Disc - 83-92 RX-7 N/T

The Sport/Race Clutch Disc for the 1983-92 RX-7 chassis (12A & 13B 6-Port Non-Turbo) is designed for road race and occasional drag race use. The disc features four (4) sintered copper pucks and a sprung hub for a quick, positive engagement. The... Sport/Race 4-Puck Clutch Disc - 83-92 RX-7 N/T

Street/Strip Pressure Plate - 83-92 12A/13B 6PT

Street/Strip Pressure Plate - 83-92 12A/13B 6PT

Our Exedy Street/Strip Pressure Plate, intended for the 1983-92 RX-7 12A & 13B (6-Port Non-Turbo) chassis, is designed for high-performance street applications and for occasional drag or road racing. A stronger diaphragm spring applies... Street/Strip Pressure Plate - 83-92 12A/13B 6PT

Competition Transmission Mount - 79-85 RX-7

Competition Transmission Mount - 79-85 RX-7

We offer the Mazda Competition Parts Department competition transmission mount for the 1979-85 RX-7 (all models). This mount features rubber material that is approximately 40% stiffer than the stock mount. One required.

Competition Transmission Mount - 79-85 RX-7

Go to Racing Beat Home Page
Select: Go to Shopping Cart