1986-92 Mazda RX-7 Performance Parts : Clutch/Pressure Plate

 : Clutch/Pressure Plate : Street/Strip Pressure Plate 87-91 TURBO II

Street/Strip Pressure Plate
87-91 TURBO II

Part Number: 12620

Price: $337.00

Qty:

Addtional Photos - Select to Enlarge

Facebook Share

Street/Strip Pressure Plate
87-91 TURBO II

The 1987-91 TURBO II High Performance Pressure Plate provides excellent clamping force to significantly reduce slipping. Manufactured from all new parts, this pressure plate interchanges exactly with the stock unit.

Time Saving Tip: We strongly recommend replacing the throw-out bearing during any clutch work to ensure trouble free performance. Also, we recommend replacing the transmission front and rear seal kit when re-installing the transmission to reduce the possibility of leakage.

WARNING: None of the Flywheel or Clutch components shown in this catalog should ever be allowed to exceed 10,500 RPM under any condition. This same RPM limit applies to stock components. You must use an engine RPM-limiter to prevent excessive RPM. If your engine is capable of exceeding 8,500 RPM you must install a transmission scatter shield, or ballistic blanket. Failure to implement the above may result in serious injury or even death.

Customers who bought the above item also often bought:

Transmission Throwout Bearing - 87-88 TURBO II

Transmission Throwout Bearing - 87-88 TURBO II

The original throwout bearing normally does not require replacement unless it has been abused in some way. However, if it has been making noise, such as a whirring sound when the clutch pedal is depressed, or if the slave linkage has run out of... Transmission Throwout Bearing - 87-88 TURBO II

Stainless Steel Clutch Line - 86-92 RX-7

Stainless Steel Clutch Line - 86-92 RX-7

Replace the original rubber clutch line on your 1986-92 RX-7 chassis with an upgraded braided stainless steel line. Can be used for both street and race applications.

Stainless Steel Clutch Line - 86-92 RX-7

Sport/Race Disc -6 Puck - 87-95 RX-7 Turbo & RX-8

Sport/Race Disc -6 Puck - 87-95 RX-7 Turbo & RX-8

The 6-Puck 240mm Sport/Race Clutch Disc for the 1987-95 RX-7 TURBO & RX-8 chassis is designed for road race and occasional drag race use. The disc features six (6) sintered copper pucks and a sprung hub for a quick, positive engagement. The... Sport/Race Disc -6 Puck - 87-95 RX-7 Turbo & RX-8

Transmission Seal Kit - 87-88 TURBO II

Transmission Seal Kit - 87-88 TURBO II

We recommend replacing the transmission front seal and rear seal kit when re-installing the transmission to reduce the risk of leakage. The primary reason for leaks seems to be the large loads that are placed on the input shaft when re-installing... Transmission Seal Kit - 87-88 TURBO II

Go to Racing Beat Home Page
Select: Go to Shopping Cart