1986-92 Mazda RX-7 Performance Parts : Clutch/Pressure Plate

 : Clutch/Pressure Plate : Exedy Clutch Kit - Stage 2 1987-91 RX-7 TII

Exedy Clutch Kit - Stage 2
1987-91 RX-7 TII

RB Part Number: 12649

Exedy
10952A

Price: $473.00

Qty:

Exedy Clutch Kit - Stage 2 - 1987-91 RX-7 TII - Detail 1

Addtional Photos - Select to Enlarge

Facebook Share

Exedy Clutch Kit - Stage 2
1987-91 RX-7 TII

The EXEDY Complete Clutch Kit Stage 2 for the 1987-91 RX-7 Turbo II  (EXEDY 10952A) is highly recommended for high performance street, autocross and racing applications where quick shifting response is required.

Exedy/Daikin Clutch is one world's largest suppliers of both stock OEM and performance aftermarket clutch components. This complete Exedy Stage 2 clutch kit for the RX-7 Turbo II includes a 3-puck sprung-hub, cerametallic compound disc (240mm OD), upgraded pressure plate (269 ft/lbs wheel torque clamp load), replacement throw out bearing, pilot bearing, and a clutch installation alignment tool. The S-Metal Clutch Disc utilizes low gravity, T5001 Carborich cerametallic material for outstanding heat dissipation and performance. Exedy cerametallic clutch discs are designed to handle the abuse of high-powered performance driving and racing applications. Cerametallic discs can handle more slippage than stock-type assemblies, which reduces slipping and fading that can be common with more "streetable" components. All Exedy discs feature sprung-hub dampening to reduce impact and shock loads.

 This is a complete kit at a great price! If you are considering replacing your clutch assembly with an aftermarket kit, the Exedy components offer a super combination of performance and value.

 Packaged only as a set, these components are not available separately. Photo shown may not be specific to this application.

Exedy Application Guide

 Racing Beat offers different clutch packages for the 1987-91 Turbo II, each intended for a specific application. Use this reference guide to determine the package that best meets your requirements:

 Exedy Stage 1 - This is the preferred clutch for street and light horsepower track use. Driveability is similar to the stock clutch with smooth engagement characteristics. Pedal efforts will be slightly higher due to the approx 25% higher clamp loads. The clutch disc is equipped with spring center dampers to reduce drivetrain shock. Rated wheel torque - 237 ft/lbs.

 Exedy Stage 1 HD – The Heavy Duty (HD) clutch package features the exact same disc as the Stage 1 package, but this kit is equipped with a more aggressive pressure plate for use with higher horsepower applications. This pressure plate offers higher clamping forces and pedal efforts will be greater due to the approx. 40% higher clamping loads as compared with the stock pressure plate. The clutch disc is equipped with spring center dampers to reduce drivetrain shock. Rated wheel torque - 296 ft/lbs.  

Exedy Stage 2 – This kit features a low-inertia cerametallic disc with a sprung hub center for use on ”street/strip/weekend racer” applications. These components are intended to handle the abuse of higher-powered modified engines and can typically handle more abuse than stock-type disc assemblies without slipping and fading. The sprung hub center offers ease of engagement vibrations at idle and during acceleration/deceleration. Clutch engagement is very abrupt and best suited for use in racing and high performance driving applications – not recommended for street use. Rated wheel torque - 269 ft/lbs.

Exedy Stage 2 HD – The Heavy Duty (HD) clutch package features the exact same disc as the Stage 2 package, but this kit is equipped with a more aggressive pressure plate for use with higher horsepower applications. This pressure plate offers higher clamping forces and pedal efforts will be greater due to the approx. 14% higher clamping loads as compared with the Stage 2 pressure plate. The sprung hub center offers ease of engagement vibrations at idle and during acceleration/deceleration. Clutch engagement is very abrupt and best suited for use in racing and high performance driving applications – not recommended for street use. Rated wheel torque - 337 ft/lbs. 

Customers who bought the above item also often bought:

RX-7/RX-8 Flywheel - Aluminum - 87-95 RX-7 Turbo / RX-8

RX-7/RX-8 Flywheel - Aluminum - 87-95 RX-7 Turbo / RX-8

Racing Beat-designed RX-7 flywheels are both engineered and manufactured by Racing Beat for a wide variety of rotary performance applications. This Racing Beat Aluminum Flywheel can be used on all 1987-95 RX-7 13B turbo engine... RX-7/RX-8 Flywheel - Aluminum - 87-95 RX-7 Turbo / RX-8

Aluminum Flywheel Mounting Hardware Kit - 87-95 RX-8 / RX-8

Aluminum Flywheel Mounting Hardware Kit - 87-95 RX-8 / RX-8

This kit contains the required hardware to mount a Racing Beat Aluminum Flywheel to any 1987-91 Turbo II, 1993-95 RX-7, or 2004-2011 RX-8 Renesis engine.

 The kit also includes the small spacers required for mating the pressure... Aluminum Flywheel Mounting Hardware Kit - 87-95 RX-8 / RX-8

Weber Carb - 51 IDA - Down Draft

Weber Carb - 51 IDA - Down Draft

Both the elegant design and the simplicity in the maintenance of the WEBER Carburetors have proven to be compelling reasons as to why the Weber name has remained so popular over the years.

The Weber 51 IDA carburetor is a special... Weber Carb - 51 IDA - Down Draft

Stainless Steel Clutch Line - 04-11 RX-8 / 06-14 MX-5

Stainless Steel Clutch Line - 04-11 RX-8 / 06-14 MX-5

Replace the original rubber clutch line on your 2004-11 RX-8 / 2006-14 MX-5 chassis with an upgraded braided stainless steel line. Can be used for both street and race applications.

Stainless Steel Clutch Line - 04-11 RX-8 / 06-14 MX-5

Go to Racing Beat Home Page
Select: Go to Shopping Cart