1986-92 Mazda RX-7 Performance Parts : Clutch/Pressure Plate

 : Clutch/Pressure Plate : Clutch Alignment Tool 71-92 All non-turbo engines

Clutch Alignment Tool
71-92 All non-turbo engines

Part Number: 22005

Price: $5.00

Qty:

Clutch Alignment Tool - 71-92 All non-turbo engines - Detail 1

Addtional Photos - Select to Enlarge

Facebook Share

Clutch Alignment Tool
71-92 All non-turbo engines

This clutch disc alignment tool simplifies clutch installation on all 1971-92 12A and 13B non-turbo rotary engines by aligning the clutch disc splines with the eccentric shaft pilot bearing. Although you'll likely use this tool only once or twice during the life of your car, this reasonably priced took is "must-have" if you are considering the replacement of your clutch assembly. Made of durable nylon material, this tool will likely outlast both you and your car!

Customers who bought the above item also often bought:

Street/Strip HD Clutch Disc - 83-92  Non-Turbo

Street/Strip HD Clutch Disc - 83-92 Non-Turbo

The Street/Strip HD (Heavy Duty) 225mm Clutch Disc for the 1983-92 Non-Turbo RX-7s is similar to the standard Street/Strip Disc, but has an additional feature to increase its strength: twice the number of rivets attaching each friction lining to the... Street/Strip HD Clutch Disc - 83-92  Non-Turbo

RX-7 Flywheel - Aluminum - 74-82 12A Rotary

RX-7 Flywheel - Aluminum - 74-82 12A Rotary

Racing Beat-designed RX-7 flywheels are both engineered and manufactured by Racing Beat for a wide variety of rotary performance applications. This Racing Beat Aluminum Flywheel can be used on any early (pre-RX-7)  RX-2,... RX-7 Flywheel - Aluminum - 74-82 12A Rotary

Transmission Seal Kit - 89-92 Non-Turbo

Transmission Seal Kit - 89-92 Non-Turbo

We recommend replacing the transmission front seal and rear seal kit when re-installing the transmission to reduce the risk of leakage. The primary reason for leaks seems to be the large loads that are placed on the input shaft when re-installing... Transmission Seal Kit - 89-92 Non-Turbo

Transmission Throwout Bearing - 89-92 RX-7 - All

Transmission Throwout Bearing - 89-92 RX-7 - All

The original throwout bearing normally does not require replacement unless it has been abused in some way. However, if it has been making noise, such as a whirring sound when the clutch pedal is depressed, or if the slave linkage has run out of... Transmission Throwout Bearing - 89-92 RX-7 - All

Go to Racing Beat Home Page
Select: Go to Shopping Cart