1986-92 Mazda RX-7 Performance Parts : Exhaust Complete Systems

 : Exhaust - Complete Systems : REV TII Y-Pipe 87-91 RX-7 TURBO II

REV TII Y-Pipe
87-91 RX-7 TURBO II *

Part Number: 16425Y

Price: $195.00

Qty:

REV TII Y-Pipe - 87-91 RX-7 TURBO II - Detail 1

Addtional Photos - Select to Enlarge

Facebook Share

REV TII Y-Pipe
87-91 RX-7 TURBO II *

The REV TII stainless steel Y-pipe is a direct replacement for the Y-pipe section in the Racing Beat REV TII Complete Exhaust System. Intended for use between the REV TII presilencer and main dual mufflers, this Y-pipe is intended as a bolt-on component ONLY if used with the REV TII Complete Exhaust System components.

Supplied with a 3-inch OD inlet flange, this Y-pipe section can also be used in a custom exhaust application. Extending rearward from the inlet tube are two 60mm OD (2.375") tubes, which direct the exhaust gas to the dual mufflers. Each outlet end of the Y-pipe is fitted with a 60mm OD (2.375") flange.

Gaskets are not supplied but can be purchased separately. For more information regarding a front replacement gasket (1 required), and/or rear replacement gaskets (2 required), visit these links.

.

* Legal in California only for racing vehicles, which may never be used upon a highway.
  What does this mean? Click Frequently Asked Questions About Emission Laws And Regulations.
Made in the USAMade in the USA by Racing Beat, Inc.

Customers who bought the above item also often bought:

Exhaust Gasket - 3-inch ID

Exhaust Gasket - 3-inch ID

flange-gasket-guide.pdf This 3" ID exhaust gasket (80mm) can be used on the following Racing Beat components: RX-7 Muffler (and connecting pipe) This exhaust gasket can be used between the muffler and connecting pipe on the... Exhaust Gasket - 3-inch ID

REV TII Complete System - Muffler Gasket

REV TII Complete System - Muffler Gasket

This gasket is intended for the REV TII Complete Exhaust System. This gasket has been designed for the oversized tubing that is used in this system. If you need a gasket for a stock muffler or a Racing Beat cat-back system muffler for a TURBO II... REV TII Complete System - Muffler Gasket

Exhaust Flange - Stainless Steel - 3-inch ID

Exhaust Flange - Stainless Steel - 3-inch ID

flange-gasket-guide.pdf We offer this cast-stainless steel 3" ID flange for use in many custom applications. This flange measures 7/16" thick, has 7/16" diameter mounting holes spaced 110mm (approx 4-5/16") apart (from... Exhaust Flange - Stainless Steel - 3-inch ID

REV TII Muffler - Right - 87-91 Turbo II

REV TII Muffler - Right - 87-91 Turbo II

Our Racing Beat REV TII RX-7 Muffler (right/passenger side) is a direct replacement for the muffler that is included in the Racing Beat REV TII Complete RX-7 Exhaust System. This muffler is intended as a bolt-on component ONLY when used with the REV TII... REV TII Muffler - Right - 87-91 Turbo II

Go to Racing Beat Home Page
Select: Go to Shopping Cart