1986-92 Mazda RX-7 Performance Parts : Exhaust Complete Systems

 : Exhaust - Complete Systems : REV TII Y-Pipe 87-91 RX-7 TURBO II

REV TII Y-Pipe
87-91 RX-7 TURBO II *

Part Number: 16425Y

Price: $188.00

Qty:

REV TII Y-Pipe - 87-91 RX-7 TURBO II - Detail 1

Addtional Photos - Select to Enlarge

Facebook Share

REV TII Y-Pipe
87-91 RX-7 TURBO II *

The REV TII stainless steel Y-pipe is a direct replacement for the Y-pipe section in the Racing Beat REV TII Complete Exhaust System. Intended for use between the REV TII presilencer and main dual mufflers, this Y-pipe is intended as a bolt-on component ONLY if used with the REV TII Complete Exhaust System components.

Supplied with a 3-inch OD inlet flange, this Y-pipe section can also be used in a custom exhaust application. Extending rearward from the inlet tube are two 60mm OD (2.375") tubes, which direct the exhaust gas to the dual mufflers. Each outlet end of the Y-pipe is fitted with a 60mm OD (2.375") flange.

Gaskets are not supplied but can be purchased separately. For more information regarding a front replacement gasket (1 required), and/or rear replacement gaskets (2 required), visit these links.

.

* Legal in California only for racing vehicles, which may never be used upon a highway.
  What does this mean? Click Frequently Asked Questions About Emission Laws And Regulations.
Made in the USAMade in the USA by Racing Beat, Inc.

Customers who bought the above item also often bought:

Turbo Outlet Gasket  - 87-91

Turbo Outlet Gasket - 87-91

flange-gasket-guide.pdf

This gasket is intended for the turbo outlet flange on a 1987-91 TURBO II RX-7. This part is a genuine Mazda factory component and is a multi-layered stainless steel crush style gasket.

Turbo Outlet Gasket  - 87-91

Exhaust Gasket - 3-inch ID

Exhaust Gasket - 3-inch ID

flange-gasket-guide.pdf

This 3" ID exhaust gasket (80mm) can be used on the following Racing Beat components:

RX-7 Muffler (and connecting pipe)
This exhaust gasket can be used between... Exhaust Gasket - 3-inch ID

Exhaust Flange - Stainless Steel - 3-inch ID

Exhaust Flange - Stainless Steel - 3-inch ID

flange-gasket-guide.pdf

We offer this cast-stainless steel 3" ID flange for use in many custom applications. This flange measures 7/16" thick, has 7/16" diameter mounting holes spaced 110mm (approx 4-5/16")... Exhaust Flange - Stainless Steel - 3-inch ID

REV TII Down Pipe - 87-91 RX-7 TURBO II

REV TII Down Pipe - 87-91 RX-7 TURBO II

The REV TII 3-inch OD stainless steel RX-7 down pipe is a direct replacement for the down pipe in the Racing Beat REV TII Complete RX-7 Exhaust System. This down pipe is intended as a bolt-on component ONLY if used with the Racing Beat REV TII... REV TII Down Pipe - 87-91 RX-7 TURBO II

Go to Racing Beat Home Page
Select: Go to Shopping Cart