1986-92 Mazda RX-7 Performance Parts : Exhaust Headers

 : Exhaust - Headers : Road Race Header - Stainless Steel 89-92 RX-7

Road Race Header - Stainless Steel
89-92 RX-7 *

Part Number: 16132

Price: $354.00

Qty:

Addtional Photos - Select to Enlarge

Facebook Share

Road Race Header - Stainless Steel
89-92 RX-7 *

Road Race Header - 1989-92 RX-7 13B 6-Port

Making their return to the Racing Beat line-up are these beautifully crafted stainless steel rotary engine exhaust headers. The Racing Beat Road Race Header is constructed using mandrel-bent 2" OD 304-grade stainless steel tubing, then polished to a mirror-like shine for a dazzling appearance. The unique Racing Beat designed engine-to-header and the header outlet flanges are cast from 304-stainless steel and surface machined and polished to ensure optimum exhaust gas sealing. These flanges are unique to Racing Beat's headers and have been designed to offer superior mounting and sealing qualities.

This header is intended for use on all 1989-92 RX-7 13B non-turbo (6-port intake) applications and can be used as the starting component in a custom race exhaust, or mated to the inlet of the Racing Beat Road Race Presilencer section.

This header weighs approximately 10 lbs as compared with our 15 lb steel version. Outlet flange gaskets, bolts, and nuts are included. Engine-to-pipe gaskets are not included, but are available separately. An Air Control and Check Valve Cover Plate is required when using this header with a stock intake system. An oxygen sensor fitting is included on this header.

 

.

* Legal in California only for racing vehicles, which may never be used upon a highway.
  What does this mean? Click Frequently Asked Questions About Emission Laws And Regulations.

Customers who bought the above item also often bought:

Engine-to-Header Gasket - 84-92 13B 6-Port Engine / 20B 3-Rotor Engine

Engine-to-Header Gasket - 84-92 13B 6-Port Engine / 20B 3-Rotor Engine

flange-gasket-guide.pdf Engine-to-Header Gasket - 1984-92 13B 6-Port Engine - This gasket is required to mount when mounting a header or exhaust manifold to a 1984-92 13B (6-Port Intake) rotary engine, or a 20B 3-rotor engine (2 needed -... Engine-to-Header Gasket - 84-92 13B 6-Port Engine / 20B 3-Rotor Engine

Road Race Header Outlet Gasket

Road Race Header Outlet Gasket

flange-gasket-guide.pdf Racing Beat's Road Race Header - Outlet Gasket This gasket is intended for use with the outlet flange of the Racing Beat Road Race header (one required). This gasket is also used on ALL Racing Beat Road Race... Road Race Header Outlet Gasket

Race Disc - 4 Puck - 83-92 RX-7 Non-Turbo - 225mm

Race Disc - 4 Puck - 83-92 RX-7 Non-Turbo - 225mm

The 4-Puck 225mm Race Clutch Disc, offered for all 1983-92 RX-7 Non-Turbo chassis, is designed for drag and road race use. The disc incorporates four (4) sintered copper pucks and a solid hub for quick, positive engagement, greater fatigue resistance and... Race Disc - 4 Puck - 83-92 RX-7 Non-Turbo - 225mm

Oxygen Sensor Fitting - Stainless Steel

Oxygen Sensor Fitting - Stainless Steel

Commonly referred to as a oxygen sensor "bung", this stainless steel fitting can be installed onto any exhaust component that requires an oxygen sensor. This fitting can also be used when installing a wide-band oxygen sensor or an exhaust gas... Oxygen Sensor Fitting - Stainless Steel

Go to Racing Beat Home Page
Select: Go to Shopping Cart