1986-92 Mazda RX-7 Performance Parts : Exhaust Headers

 : Exhaust - Headers : Presilencer  86-88 RX-7 Non-turbo - Man Trans

Presilencer
86-88 RX-7 Non-turbo - Man Trans *

Part Number: 16405

Price: $254.00

Qty:

Presilencer  - 86-88 RX-7 Non-turbo - Man Trans - Detail 1Presilencer  - 86-88 RX-7 Non-turbo - Man Trans - Detail 2Presilencer  - 86-88 RX-7 Non-turbo - Man Trans - Detail 3

Addtional Photos - Select to Enlarge

Facebook Share

Presilencer
86-88 RX-7 Non-turbo - Man Trans *

The Racing Beat Power Pulse Presilencer for the 1986-88 RX-7 Non-turbo (w/manual transmission) is designed to be used with our wide selection of RX-7 headers to complete a bolt-on configuration to the Y-pipe section.

This same Power Pulse Presilencer is included as a sub-component with the Catalytic Converter Replacement Pipe/Presilencer assemblies we offer for all 1986-88 RX-7s. Furthermore, these Power Pulse Presilencers are ideal for those individuals wanting to fabricate custom exhaust systems incorporating either long or short primaries.

The Racing Beat Power Pulse Presilencer improves the character of the exhaust noise, dramatically reducing the inherent, obnoxious metallic high frequency noise with virtually no power loss. Constructed using a stainless-steel shell, interior core tube, and high temperature stainless packing wool, the Power Pulse Presilencer measures 20-inches in length with a 4-inch outside diameter. Each end is fitted with 12mm studs. The attachment hanger shown will allow correct fitment onto the exact application listed.

The 1986-92 RX-7 Power Pulse Presilencers are manufactured with a large diameter 2.5-inch I.D. core pipe for improved exhaust gas flow. Additionally, the Power Pulse Presilencers we offer for use with non-turbo 1986-88 6-port engines feature an exhaust gas backpressure sensing tube necessary for proper operation of the 6-port intake actuator valves.

If you are using two Power Pulse Presilencers in conjunction with our Road Racing Header for a long primary system on a 1986-88 13B 6-port engine we recommend using one (1) of our 1984-85 GSL-SE Presilencers equipped with the back pressure sensing tube, and one (1) of our GSL-SE Presilencers standard presilencers used on 4-port engines. With this configuration you will have one presilencer with the backpressure pickup tube, and one presilencer without the tube, which would be suitable for building a long primary center section.

Gaskets are not included but are available separately. Two required.

Replacement Rubber Exhaust Hangers

It is our experience that the stock rubber hangers that support the exhaust system can deteriorate and crack with age. We suggest the replacement of these hangers when installing replacement exhaust components. If you require a replacement rubber hanger for use with your Presilencer unit, follow this link for more detailed information.

.

* Legal in California only for racing vehicles, which may never be used upon a highway.
  What does this mean? Click Frequently Asked Questions About Emission Laws And Regulations.
Made in the USAMade in the USA by Racing Beat, Inc.

Customers who bought the above item also often bought:

Down Pipe & Presilencer Gasket - 86-92 RX-7

Down Pipe & Presilencer Gasket - 86-92 RX-7

flange-gasket-guide.pdf This gasket can be used with the following Racing Beat exhaust components: Non-turbo Down-Pipe 1986-92 RX-7 (Front & Rear) - This gasket can be used at the front (1 each required) and rear (1 each... Down Pipe & Presilencer Gasket - 86-92 RX-7

Rotary Exaust Header - 86-92 RX-7 Non-turbo

Rotary Exaust Header - 86-92 RX-7 Non-turbo

Our rotary exhaust Header/Collector is designed for a bolt-on installation, when used with the appropriate Power Pulse Presilencer, in all 1986-92 non-turbo RX-7s. The combination of this Header/Collector and the appropriate presilencer replaces the stock... Rotary Exaust Header - 86-92 RX-7 Non-turbo

Engine-to-Header Gasket - 84-92 13B 6-Port Engine / 20B 3-Rotor Engine

Engine-to-Header Gasket - 84-92 13B 6-Port Engine / 20B 3-Rotor Engine

flange-gasket-guide.pdf Engine-to-Header Gasket - 1984-92 13B 6-Port Engine - This gasket is required to mount when mounting a header or exhaust manifold to a 1984-92 13B (6-Port Intake) rotary engine, or a 20B 3-rotor engine (2 needed -... Engine-to-Header Gasket - 84-92 13B 6-Port Engine / 20B 3-Rotor Engine

Racing Beat License Plate Frame

Racing Beat License Plate Frame

This Racing Beat logo license plate frame will look good on any Mazda vehicle! Constructed from heavy gauge plastic, this economical plate frame is the perfect addition to your vehicle. Racing Beat License Plate Frame

Go to Racing Beat Home Page
Select: Go to Shopping Cart