1986-92 Mazda RX-7 Performance Parts : Flywheels

 : Flywheels : Aluminum Flywheel Mounting Hardware Kit 87-95 RX-8 / RX-8

Aluminum Flywheel Mounting Hardware Kit
87-95 RX-8 / RX-8

Part Number: 95193

Price: $19.00

Qty:

Aluminum Flywheel Mounting Hardware Kit - 87-95 RX-8 / RX-8 - Detail 1

Addtional Photos - Select to Enlarge

Facebook Share

Aluminum Flywheel Mounting Hardware Kit
87-95 RX-8 / RX-8

This kit contains the required hardware to mount a Racing Beat Aluminum Flywheel to any 1987-91 Turbo II, 1993-95 RX-7, or 2004-2011 RX-8 Renesis engine.

 The kit also includes the small spacers required for mating the pressure plate to the Racing Beat flywheel. Each kits includes mounting bolts, nuts, washers and instructions. For use with Racing Beat flywheel (S11448) and Racing Beat Flywheel Kit (11435).

Customers who bought the above item also often bought:

RX-7/RX-8 Flywheel - Aluminum - 87-95 RX-7 Turbo / RX-8

RX-7/RX-8 Flywheel - Aluminum - 87-95 RX-7 Turbo / RX-8

Racing Beat-designed RX-7 flywheels are both engineered and manufactured by Racing Beat for a wide variety of rotary performance applications. This Racing Beat Aluminum Flywheel can be used on all 1987-95 RX-7 13B turbo engine... RX-7/RX-8 Flywheel - Aluminum - 87-95 RX-7 Turbo / RX-8

Rear Counterweight - 89-95 All

Rear Counterweight - 89-95 All

Rear Counterweight - 1989-95 13B ALL Engines - All automatic transmission-configured Mazda rotary engines are equipped with a rear counterweight as shown. The counterweight serves as both a critical engine balancing component and as an attachment... Rear Counterweight - 89-95 All

Stock Flywheel Puller Tool

Stock Flywheel Puller Tool

The Stock Flywheel Puller Tool will remove any stock Mazda flywheel from its taper press fit on the eccentric shaft once the flywheel nut is loosened. This easy-to-use tool is a "must have" for any serious rotary mechanic!

Stock Flywheel Puller Tool

Exhaust Gasket - 3-inch ID

Exhaust Gasket - 3-inch ID

Flange & Gasket Guide

Flange & Gasket Guide

Use this illustrated guide to select the exact flange and/or gasket for your application.

This 3" ID exhaust gasket (80mm) can be used on the following Racing Beat components:

RX-7 Muffler (and connecting pipe)
This exhaust gasket can be... Exhaust Gasket - 3-inch ID

Go to Racing Beat Home Page
Select: Go to Shopping Cart