1986-92 Mazda RX-7 Performance Parts : Intake Holley Components

 : Intake - Holley Components : Holley Intake Manifold 87-91 TURBO II

Holley Intake Manifold
87-91 TURBO II *

Part Number: 16475

Price: $406.28

Qty:

Holley Intake Manifold - 87-91 TURBO II - Detail 1Holley Intake Manifold - 87-91 TURBO II - Detail 2

Addtional Photos - Select to Enlarge

Include These Recommended Parts With My Order:

Intake Gasket - Engine to Manifold - 1989-91 Turbo II
Engine to Manifold Gasket (#16743)
Price: $11.55
Holley Carburetor Base Gasket -
Base Gasket (#16746)
Price: $12.60

Holley Intake Manifold
87-91 TURBO II *

Holley Intake Manifold
1987-91 TURBO II

The Racing Beat-designed intake manifold for the 1987-91 TURBO II engine is ideally suited to meet the performance requirements of the Holley carburetor. Designed by Chief Engineer/Engine Builder Jim Mederer, these cast aluminum intake manifolds have proven themselves in a variety of street and race applications.

All of Racing Beat's manifolds for Holley carburetor applications are sand-cast by a local foundries and delivered to our in-house production shop for all machining and surface finishing processes. Manifolds are then hand-ported to match a specific intake port configuration for an intended engine application. Further machining is then undertaken to match the base-plate surface to the Holley carburetor base. These critical machining steps ensure a positive fitment between both the engine surface and the carburetor base. Every manifold is then surface finished using a ball-burnishing process that enhances the final appearance of the aluminum material. Once these labor-intensive processes have been completed these manifolds look as good as they perform!

This manifold includes a vacuum source for power brakes. If needed, an engine-to-manifold gasket, and/or Holley base gasket are available separately. 

Installation Note:
Requires four (4) 5/16"-18 x 1.5"L fully threaded hex bolts and washers to mount a carburetor to the top plate.We suggest you thread the bolts from the underside of the top mounting flange forming mounting "studs" for the carburetor. Place the carburetor over the studs and secure with split washers and 5/16" hex nuts.

* Legal in California only for racing vehicles, which may never be used upon a highway.
  What does this mean? Click Frequently Asked Questions About Emission Laws And Regulations.
Made in the USAMade in the USA by Racing Beat, Inc.
Prop65Warning

Customers who bought the above item also often bought:

Intake Gasket - Engine to Manifold - 1989-91 Turbo II

Intake Gasket - Engine to Manifold - 1989-91 Turbo II

Racing Beat offers the 1989-91 Turbo II Intake-to-Engine Manifold Gasket for all Mazda Factory OEM and Racing Beat Holley and Weber Manifold applications.  When installing either the Mazda Factory OEM or the Racing Beat Manifolds, you will also... »more
Price: $11.55 ADD »

Intake Water O-Ring - Specific Applications

Intake Water O-Ring - Specific Applications

The Mazda Factory Intake Water O-Rings are designed to mount between the intake manifold and the engine. Sold individually, two (2) required per intake manifold. Specific Applications: 1974-78 13B 4 Port Engines 1974-85 12A engines 1987-91... »more
Price: $6.00 ADD »

Throttle Cable Bracket - Holley (4-Port Engine)

Throttle Cable Bracket - Holley (4-Port Engine)

Throttle Cable Bracket for Holley Carburetors (Except 6-port Applications) - This throttle cable bracket is incorporated into our Complete Holley Intake Kits that we offer, but can be purchased separately. This bracket is intended for Holley... »more
Price: $35.18 ADD »

Oil Hose Adapter Fitting - 16MM to -10 Hose

Oil Hose Adapter Fitting - 16MM to -10 Hose

We offer the Racing Beat Oil Cooler Hose Adapter Fittings to simplify oil system plumbing. These fittings adapt the 16mm female metric threads in the 1971-95 rotary engine front cover and 1971-85 oil cooler (stock or factory race version) to accept -10... »more
Price: $20.62 ADD »

Go to Racing Beat Home Page
Select: Go to Shopping Cart