1986-92 Mazda RX-7 Performance Parts : Ignition

 : Ignition : Spark Plug - Stock BUR7EQP 86-95 LEADING

Spark Plug - Stock
BUR7EQP 86-95 LEADING

RB Part Number: 11534

NGK
BUR7EQP

Price: $10.95

Qty:

Spark Plug - Stock - BUR7EQP 86-95 LEADING - Detail 1

Addtional Photos - Select to Enlarge

Facebook Share

Spark Plug - Stock
BUR7EQP 86-95 LEADING

For literally decades, Racing Beat has recommended NGK Spark Plugs for Street, High Performance, and Race rotary engine applications. The NGK BUR7EQP spark plug is the Mazda factory-recommended LEADING spark plug for all 1986-95 RX-7s. This "resistor/platinum" spark plug is recommended for city and highway driving. Price shown is for one (1) spark plug, two (2) LEADING spark plugs required per engine.

Specifications: NGK BUR7EQP

B= 14mm Thread Diameter
U= Surface or Semi Surface Discharge Type R= Resistor Type Plug
7= Heat Rating *
E= 19mm Thread reach
Q= 4-Ground Electrodes (Firing End Construction)
P= Platinum

THIS PART CANNOT BE RETURNED FOR EXCHANGE OR REFUND DUE TO ITS FRAGILE NATURE AND POSSIBLE CUSTOMER MISHANDLING 

 

*A spark plug's heat range has no relationship to the actual voltage transferred though the spark plug, Rather, the heat range is a measure of the spark plug's ability to remove heat from the combustion chamber. The heat range measurement is determined by several factors; the length of the ceramic center insulator nose and its' ability to absorb and transfer combustion heat, the material composition of the insulator and center electrode material.

The insulator nose length is the distance from the firing tip of the insulator to the point where insulator meets the metal shell. Since the insulator tip is the hottest part of the spark plug, the tip temperature is a primary factor in pre-ignition and fouling. Whether the spark plugs are fitted in a lawnmower, boat, or a race car, the spark plug tip temperature must remain between 850-1500 degrees F. If the tip temperature is lower than 850 degrees F the insulator area surrounding the center electrode will not be hot enough to burn off carbon and combustion chamber deposits. These accumulated deposits can result in spark plug fouling leading to misfire. If the tip temperature is higher than 1500 degrees F the spark plug will overheat which may cause the ceramic around the center electrode to blister and the electrodes to melt. This may lead to pre-ignition /detonation and expensive engine damage.

The firing end appearance also depends on the spark plug tip temperature. There are three basic diagnostic criteria for spark plugs: good, fouled and overheated. The borderline between the fouling and optimum operating regions is called the spark plug self-cleaning temperature. The temperature at this point is where the accumulated carbon and combustion deposits are burned off.

Bearing in mind that the insulator nose length is a determining factor in the heat range of a spark plug, the longer the insulator nose, the less heat is absorbed, and the further the heat must travel into the cylinder head (rotor housings) water journals. This means the plug has a higher internal temperature, and is said to be a hot plug. A hot spark plug maintains a higher internal operating temperature to burn off oil and carbon deposits, and has no relationship to spark quality or intensity.

Conversely, a cold spark plug has a shorter insulator nose and absorbs more combustion chamber heat. This heat travels a shorter distance, and allows the plug to operate at a lower internal temperature. A colder heat range can be necessary when the engine is modified for performance, subjected to heavy loads, or is run at high RPM's for a significant period of time. The colder type removes heat more quickly, and will reduce the chance of pre-ignition/detonation and burn-out of the firing end. (Engine temperature can affect the spark plug's operating temperature, but not the spark plugs heat range).

The NGK heat range is from Hot (2) to Cold (10).

Reprinted from the NGK Product Catalog.

Customers who bought the above item also often bought:

Spark Plug - Stock - BUR9EQP 86-95 TRAILING

Spark Plug - Stock - BUR9EQP 86-95 TRAILING

For literally decades, Racing Beat has recommended NGK Spark Plugs for Street, High Performance, and Race rotary engine applications. The NGK BUR9EQP spark plug is the Mazda factory-recommended TRAILING spark plug for all 1986-95 RX-7s.... Spark Plug - Stock - BUR9EQP 86-95 TRAILING

ULTRA Ignition Wires - 86-92 RX-7 NT

ULTRA Ignition Wires - 86-92 RX-7 NT

Racing Beat's ULTRA Ignition Wire sets for street-application 1986-92 RX-7 engines combine excellent radio noise suppression (5k Ohm resistance) with high performance .

Racing Beat's ULTRA 8mm wire sets are constructed with... ULTRA Ignition Wires - 86-92 RX-7 NT

ULTRA Ignition Wires - 87-91 RX-7 TURBO II

ULTRA Ignition Wires - 87-91 RX-7 TURBO II

Racing Beat offers ULTRA Ignition Wire sets for street-application 1987-91 TURBO II engines. Street wire sets combine excellent radio noise suppression (5k Ohm resistance) with high performance.

Racing Beat's ULTRA 8mm wire sets are... ULTRA Ignition Wires - 87-91 RX-7 TURBO II

Haynes Repair Manual - 86-91 RX-7

Haynes Repair Manual - 86-91 RX-7

Haynes repair manuals have been assisting weekend mechanics for decades. It is rare to find a home workshop or garage bench without at least 1 or 2 various well-used copies of these invaluable guides. Take some of the frustration out of your next... Haynes Repair Manual - 86-91 RX-7

Go to Racing Beat Home Page
Select: Go to Shopping Cart