1986-92 Mazda RX-7 Performance Parts : Oil System
 |
Rotor Oil Filler CapThe Racing Beat-designed and manufactured Rotor Oil Filler Cap fits All Mazda 12A and 13B Rotary Engines Except: 1993-95 RX-7, 2004-08 Auto-trans RX-8, 2009 RX-8 ALL) Yes, we know that there are many "rotor shaped" oil caps available on the ... Part Number: 11957Our Price $45.00 |
 |
Oil Presssure /Temperature Sensor AdapterThe Racing Beat-designed TYPE II Oil Pressure and Temperature Sensor Adapter unit is compatible with select 1971-92 12A and 13B engines, 2004-2008 RX-8 engines and 1999-2005 Miata engines. The TYPE II Oil Pressure and Temperature Sensor Adapter unit ... Part Number: 11803Our Price $74.00 |
 |
Oil Line Set :: 86-92 RX-7 AllRacing Beat's fully assembled Stainless Steel Oil Cooler Hose Sets for the 1986-1992 RX-7 TURBO II and Non-Turbo chassis replace the original factory RX-7 oil cooler hoses. Significantly less costly than the Mazda replacement RX-7 oil lines, the ... Part Number: 11910Our Price $236.00 |
 |
Oil Hose Adapter Fitting :: 16MM to -10 HoseWe offer the Racing Beat Oil Cooler Hose Adapter Fittings to simplify oil system plumbing. These fittings adapt the 16mm female metric threads in the front cover (1971-95 rotary engines) and oil cooler (1971-85 stock or factory race) to accept -10 hose ... Part Number: 11901Our Price $15.00 |
|
|
Oil Hose Adapter Fitting :: 18MM to -10 HoseWe offer the Racing Beat Oil Cooler Hose Adapter Fittings to simplify oil system plumbing. These fittings adapt the 18mm female metric threads in the rear housing to accept -10 hose ends. Additionally, these 18mm female fittings also fit the 1986-1992 ... Part Number: 11902Our Price $15.00 |
 |
Oil Pressure Regulator - Street 80-85 PSIThe Racing Beat high performance Rear Oil Pressure Regulator is designed for use on all 1971-1992 12A, 13B, and 20B engines and interchanges exactly with the stock unit. As supplied by Mazda, the factory pressure regulator is intended to bypass at maximum... Part Number: 11810Our Price $107.00 |
|
|
Oil Pressure Regulator - Race 105-115 PSIThe Racing Beat High Performance Rear Oil Pressure Regulator interchanges exactly with the stock rear oil pressure regulator on all 1971-2008 12A, 13B, and 20B engines. This oil pressure regulator is designed to bypass at 105-115 PSI. (Pressure this high ... Part Number: 11812Our Price $107.00 |
 |
Oil Filter Bypass Block Kit :: 79-95 Rotary EngineThe Racing Beat-designed and manufactured Oil Filter Bypass Block Kit facilitates the installation of any remote oil filter assembly for use on any 1979-95 rotary engine. Machined from aluminum-alloy with an internal passage that eliminates the location ... Part Number: 11822Our Price $71.00 |
 |
Oil Baffle Plate :: 86-92 RX-7 13B AllThe Racing Beat-designed and manufactured Oil Baffle Plate slows the return of engine oil as it drains from the engine into the pan. In slowing the oil's return, air that has been suspended in the oil (as foam) is allowed more time to separate from ... Part Number: 11825Our Price $60.00 |
 |
Oil Pan Gasket :: 86-92 13B Engine - AllRacing Beat offers the genuine Mazda factory gasket to replace a worn original gasket. Price is for one (1) gasket. For use on any 1986-92 13B (All) engine application. Part Number: 11829Our Price $28.02 |
 |
Thermal Bypass Pellet Replacement :: 86 & laterThe Racing Beat Eccentric Shaft Thermal Bypass Pellet Replacement can be installed on any 1986 and later eccentric shaft. Part Number: 11800Our Price $11.00 |
 |
Earls 809110- Swivel Seal Fitting :: Hose end to 90 degree -10AN FemaleEarl's Swivel-Seal Hose Fitting 809110ERL - 90 degree -10 AN Female to -10 AN Hose This hose fitting can be used to connect an custom oil line to our Racing Beat oil line adaptor fittings (see below), or to any other -10 male fitting. Features - ... Part Number: 11915Our Price $29.00 |
 |
Earls 904610- Swivel Seal Fitting :: Hose end to 45 degree -10AN FemaleEarl's Swivel-Seal Hose Fitting 804610ERL - 45 degree -10 AN Female to -10 AN Hose This hose fitting can be used to connect an custom oil line to our Racing Beat oil line adaptor fittings (see below), or to any other -10 male fitting. Features - ... Part Number: 11916Our Price $29.00 |
 |
Earls 800110- Fitting :: Hose end to -10AN FemaleEarl's Hose Fitting 800110ERL - Hose end to -10 AN Hose This hose fitting can be used to connect an custom oil line to our Racing Beat oil line adaptor fittings (see below), or to any other -10 male fitting. Features - Stainless Retention Pins Allow 360&... Part Number: 11917Our Price $14.00 |
 |
Earls Hose Fitting :: Hose end to 90 degree 18mm MaleRacing Beat Exclusive - Earl's Swivel-Seal Hose Fitting - 90 degree 18mm Male to -10 AN Hose This specially-configured Earl's hose fitting can be used to connect an custom oil line to a 18mm female fitting, or to the 18mm inlet ... Part Number: 11903Our Price $49.00 |
 |
3/8-in Brass NPT AdapterThis AutoMeter adaptor (ATM-2263) can be used to fit a 5/8"-18 UNF gauge fitting (as supplied on Auto Meter Mechanical Temperature Gauges) onto the 3/8" NPT sensor position on the Racing Beat TYPE II Oil/Pressure Temperature unit. Sold ... Part Number: 11836Our Price $11.00 |
 |
Remote Oil Filter Mount :: Single-Filter - HP1Typically used in racing applications, where both chassis clearance and the need for higher oil pressure operation are real concerns, the Remote Oil Filter Mount (Single Filter) simplifies the elimination of the stock oil filter mount by replacing it with... Part Number: 11820Our Price $74.00 |
 |
Remote Oil Filter Mount :: Double-Filter HP1Typically used in racing applications, where both chassis clearance and the need for higher oil pressure operation are real concerns, the Remote Oil Filter Mount (Double-Filter Configuration) simplifies the elimination of the stock oil filter mount ... Part Number: 11821Our Price $81.00 |
 |
Mazda OEM Oil Filter :: RX7, RX8, Protege, MiataThis OEM Mazda Oil Filter is intended for use on RX-7, RX-8, Protege & Protege 5, and Miata applications. It is recommended that the oil filter be replaced at the same time of an oil change. This is the genuine Mazda oil filter and is listed as part ... Part Number: 11958Our Price $8.64 |
 |
Dry Sump Kit :: 74-95 AllWe offer a variety of RATECH Dry Sump Kits for all 1974-95 12A, 13B and 20B engine applications. These Dry Sump Kits are intended for experienced, knowledgeable engine builders desiring an economical alternative to the more expensive Mazda Factory systems... Our Price $0.00 More Information Part Number: 11850 |
Repair Manuals & Books
RX-7 Flywheel - Lightweight Steel
83-92 RX-7 Non-Turbo
Racing Beat-designed RX-7 flywheels are both engineered and manufactured by Racing Beat for a wide ...
Our Price: $301.00
RX-7 Flywheel - Aluminum
83-92 RX-7 Non-Turbo
Racing Beat-designed RX-7 flywheels are both engineered and manufactured by Racing Beat for a wide ...
Our Price: $360.00
Alternator and Main Drive Pulley Set - Double Sheave
74-92 Rotary Engines (All)
Racing Beat RX-7 Pulley Set - Double Sheave Packaged as a pulley set, each kit includes one (1) double sheave alternator...
Our Price: $142.00
