1986-92 Mazda RX-7 Performance Parts : Oil System

 : Oil System : Oil Presssure /Temperature Sensor Adapter

Oil Presssure /Temperature Sensor Adapter

Part Number: 11803

Price: $74.00

Qty:

Oil Presssure /Temperature Sensor Adapter -  - Detail 1Oil Presssure /Temperature Sensor Adapter -  - Detail 2Oil Presssure /Temperature Sensor Adapter -  - Detail 3

Addtional Photos - Select to Enlarge

Facebook Share

Oil Presssure /Temperature Sensor Adapter

The Racing Beat-designed TYPE II Oil Pressure and Temperature Sensor Adapter unit is compatible with select 1971-92 12A and 13B engines, 2004-2008 RX-8 engines and 1999-2005 Miata engines.

The TYPE II Oil Pressure and Temperature Sensor Adapter unit allows for easy installation of sender units for most popular gauges (1/8-inch female pipe for oil pressure and 3/8-inch female pipe for oil temperature). Due to clearance and fitting restrictions, this adaptor is not suitable for use on: 1983-85 RX-7s equipped with oil-to-water coolers, 1993-95 RX-7, and 2009-11 RX-8s.

The machined-aluminum adapter will accommodate either mechanical or electrical senders. The adapter mounts immediately below the oil filter unit and includes a mounting O-ring and detailed installation instructions. Easily installs by simply removing the oil filter. Gauges, senders, and adapter nuts are not included. If needed, we offer an Autometer adaptor (ATM-2263) that can be used to fit a 5/8"-18 UNF gauge fitting (as supplied on Auto Meter Mechanical Temperature Gauges) onto the 3/8" NPT sensor position on this Type II Adaptor.

RX-8 owners, are you aware that the "gauge" that appears on the dash of your RX-8 is not actually a functional gauge? Have you ever seen it move? Not only have we discovered that this is a non-operational gauge, but there isn't even an oil pressure sensor on the engine! Nope, the gauge will never move from the position that you see. (There is a functioning oil level sensor and dash light.) Remedy this with the installation of your own gauge(s) in your RX-8.

To monitor water temperature in your RX-8, also see our Water Temperature Sensor Adapter unit.

Made in the USAMade in the USA by Racing Beat, Inc.

Racing Beat Recommended Accessories:

3/8-in Brass NPT Adapter

3/8-in Brass NPT Adapter

This AutoMeter adaptor (ATM-2263) can be used to fit a 5/8"-18 UNF gauge fitting (as supplied on Auto Meter Mechanical Temperature Gauges) onto the 3/8" NPT sensor position on the Racing Beat TYPE II Oil/Pressure... 3/8-in Brass NPT Adapter

Water Temperature Sensor Adapter - 04-11 RX-8

Water Temperature Sensor Adapter - 04-11 RX-8

The Racing Beat-engineered Water Temperature Sensor Adapter for the 2004-2010 RX-8 allows for easy installation of a sender unit for most popular aftermarket gauges (3/8-inch female pipe).

The machined-aluminum adapter will accommodate... Water Temperature Sensor Adapter - 04-11 RX-8

Mazda OEM Oil Filter - RX7, RX8, Protege, Miata

Mazda OEM Oil Filter - RX7, RX8, Protege, Miata

This OEM Mazda Oil Filter is intended for use on RX-7, RX-8, Protege & Protege 5, and Miata applications. It is recommended that the oil filter be replaced at the same time of an oil change. This is the genuine Mazda oil filter and is listed as... Mazda OEM Oil Filter - RX7, RX8, Protege, Miata

Go to Racing Beat Home Page
Select: Go to Shopping Cart