1986-92 Mazda RX-7 Performance Parts : Ring & Pinion Differential
 |
Ring and Pinion Gear Set - 4.30 Ratio :: 87-91 TURBO IIThe Mazda 4.30 ratio ring and pinion set is suitable use on the following rotary application: 1987-1991 TURBO II RX-7. Alternate axle ratios are available for special applications. These ratios interchange exactly with the stock parts and should be ... Part Number: 13015 |
 |
Comp Differential Mount (Front) :: 86-92 RX-7We the Mazda Competition Parts Department competition differential mount (FCY1-28-680) for the 1986-92 RX-7 (all models). This mount features rubber material that is approximately 40% stiffer than the stock mount. One required per vehicle, fits on left ... Part Number: 12052 |
 |
Competition Transmission Mount :: 86-92 RX-7We offer the Mazda Competition Parts Department competition transmission mounts for the 1986-92 RX-7 (all models). This mount features rubber material that is approximately 40% stiffer than the stock mount. Sold individually, two required per vehicle. Part Number: 12051 |
 |
Competition Diff Casing Mount :: 86-92 RX-7We offer the Mazda Competition Parts Department competition differential casing mounts (FBY1-28-890) for the 1986-92 RX-7 (all models). These mounts feature rubber material that is approximately 40% stiffer than the stock mount. Sold individually, two ... Part Number: 12053 |
 |
Differential Mount Stop Washer :: 86-92 RX-7We offer the Mazda Competition Parts Department stop washer mounts (FBY1-28-880) for the 1986-92 RX-7 (all models). These mounts feature rubber material that is approximately 40% stiffer than the stock mount. Sold individually, two required per vehicle. (... Part Number: 12054 |
 |
Differential Side Bearing :: 71-92 All Non-TurboWe have available the Mazda OEM Differential Side Bearings for all 1971-92 Rotary (Non-Turbo) differentials. (2 required) Changing from the standard differential to the limited slip differential is a fairly easy job. This modification requires only a few ... Part Number: 13509 |
|
|
Differential Side Bearing :: 87-95 RX-7 Turbo / RX-8Differential Side Bearing (2 required) - Changing from the standard differential to the limited slip differential is a fairly easy job. This modification requires only a few special tools (consult the factory shop manual) and two (2) new bearings. ... Part Number: 13541 |
 |
Differential Front Seal :: 86-92 Non TurboDifferential Front Seal 1986-92 RX-7 Non Turbo - When replacing the pinion in any RX-7 differential, it is wise to replace the pinion bearings, locknut and seal, and mandatory to change the crush tube. We offer a very high-quality aftermarket replacement ... Part Number: 13519 |
 |
Differential Front Seal :: 87-91TURBO IIDifferential Front Seal 1987-91TURBO II - When replacing the pinion in any differential, it is wise to replace the pinion bearings, locknut and seal, and mandatory to change the crush tube. The parts we offer are genuine Mazda OEM Factory parts. Part Number: 13523 |
 |
Front Pinion Bearing :: 71-92 Rotary Non-TurboWe have available the Mazda OEM Front Pinion Bearing for all 1971-92 Rotary (Non-Turbo) differentials (1 required) When replacing the pinion in any differential, it is wise to replace the pinion bearings, locknut, and seal, and mandatory to change the ... Part Number: 13510 |
|
|
Front Pinion Bearing :: 87-95 RX-7 Turbo / RX-8Front Pinion Bearing 87-91 Turbo - When replacing the pinion in any differential, it is wise to replace the pinion bearings, locknut and seal, and mandatory to change the crush tube. The parts we offer are genuine Mazda factory parts. Part Number: 13530 |
 |
Rear Pinion Bearing :: 86-92 RX-7 AllRear Pinion Bearing 1986-92 Non Turbo - When replacing the pinion in any differential, it is wise to replace the pinion bearings, locknut and seal, and mandatory to change the crush tube. The parts we offer are Mazda OEM Factory parts. Part Number: 13517 |
 |
Crush Tube :: 86-92 Non-TurboCrush Tube 1986-92 Non Turbo - When replacing the pinion in any differential, it is wise to replace the pinion bearings, locknut and seal, and mandatory to change the crush tube. The parts we offer are Mazda OEM Factory parts. Part Number: 13518 |
|
|
Crush Tube :: 87-91 TURBO IICrush Tube 1987-91 TURBO II - When replacing the pinion in any differential, it is wise to replace the pinion bearings, locknut and seal, and mandatory to change the crush tube. The parts we offer are Mazda OEM Factory parts. Part Number: 13522 |
 |
Pinion Lock Nut :: 71-95 RX-7 ALL / RX-8Pinion Lock Nut 1971-85 ALL & 1986-92 Non Turbo - When replacing the pinion in any differential, it is wise to replace the pinion bearings, locknut, and seal, and it is mandatory to change the crush tube. The parts we offer are Mazda OEM Factory parts... Part Number: 13515 |
Alternator and Main Drive Pulley Set - Double Sheave
74-92 Rotary Engines (All)
Racing Beat RX-7 Pulley Set - Double Sheave Packaged as a pulley set, each kit includes one (1) double sheave alternator...
more infoOur Price: $148.00
Engine Torque Brace
86-92 RX-7 Non-turbo
The Racing Beat-designed Engine Torque Brace for the 1986-92 RX-7 non-turbo substantially reduces or eliminates the ...
Our Price: $90.00
Prothane Bushing Kit - Complete
86-91 RX-7
Prothane Bushing Suspension Kit -1986-91 RX-7 - Racing Beat has been using Prothane bushings for many years and are ...
Our Price: $139.00
