1986-92 Mazda RX-7 Performance Parts : Ring & Pinion Differential

 : Ring & Pinion - Differential : Differential Side Bearing 87-95 RX-7 Turbo / RX-8

Differential Side Bearing
87-95 RX-7 Turbo / RX-8

Part Number: 13541

Price: $89.65

Qty:

Addtional Photos - Select to Enlarge

Differential Side Bearing
87-95 RX-7 Turbo / RX-8

Differential Side Bearing (2 required) - Changing from the standard differential to the limited slip differential is a fairly easy job. This modification requires only a few special tools (consult the factory shop manual) and two (2) new bearings. Actually, the bearings from the stock differential could be used except that pulling them off is difficult and frequently causes damage. It is usually easier to simply press a new set on the limited slip.

Prop65Warning

Customers who bought the above item also often bought:

Front Pinion Bearing - 87-95 RX-7 Turbo / RX-8

Front Pinion Bearing - 87-95 RX-7 Turbo / RX-8

Front Pinion Bearing 87-91 Turbo - When replacing the pinion in any differential, it is wise to replace the pinion bearings, locknut and seal, and mandatory to change the crush tube. The parts we offer are genuine Mazda factory parts. »more
Price: $48.13 ADD »

Pinion Lock Nut - 71-95 RX-7 ALL / RX-8

Pinion Lock Nut - 71-95 RX-7 ALL / RX-8

Pinion Lock Nut 1971-85 ALL & 1986-92 Non Turbo - When replacing the pinion in any differential, it is wise to replace the pinion bearings, locknut, and seal, and it is mandatory to change the crush tube. The parts we offer are Mazda OEM Factory... »more
Price: $11.00 ADD »

Rear Pinion Bearing - 93-95 RX-7 / RX-8

Rear Pinion Bearing - 93-95 RX-7 / RX-8

Rear Pinion Bearing - When replacing the pinion in any differential, it is wise to replace the pinion bearings, locknut and seal, and mandatory to change the crush tube. The parts we offer are Mazda factory parts. »more
Price: $97.85 ADD »

Pinion Crush Tube - 93-95 RX-7 / RX-8

Pinion Crush Tube - 93-95 RX-7 / RX-8

Crush Tube - When replacing the pinion in any differential, it is wise to replace the pinion bearings, locknut and seal, and mandatory to change the crush tube. The parts we offer are Mazda factory parts. »more
Price: $17.17 ADD »

Go to Racing Beat Home Page
Select: Go to Shopping Cart