1986-92 Mazda RX-7 Performance Parts : Ring & Pinion Differential

 : Ring & Pinion - Differential : Differential Side Bearing 87-95 RX-7 Turbo / RX-8

Differential Side Bearing
87-95 RX-7 Turbo / RX-8

Part Number: 13541

Price: $56.77

Qty:

Addtional Photos - Select to Enlarge

Facebook Share

Differential Side Bearing
87-95 RX-7 Turbo / RX-8

Differential Side Bearing (2 required) - Changing from the standard differential to the limited slip differential is a fairly easy job. This modification requires only a few special tools (consult the factory shop manual) and two (2) new bearings. Actually, the bearings from the stock differential could be used except that pulling them off is difficult and frequently causes damage. It is usually easier to simply press a new set on the limited slip.

Customers who bought the above item also often bought:

Front Pinion Bearing - 87-95 RX-7 Turbo / RX-8

Front Pinion Bearing - 87-95 RX-7 Turbo / RX-8

Front Pinion Bearing 87-91 Turbo - When replacing the pinion in any differential, it is wise to replace the pinion bearings, locknut and seal, and mandatory to change the crush tube. The parts we offer are genuine Mazda factory... Front Pinion Bearing - 87-95 RX-7 Turbo / RX-8

Rear Pinion Bearing - 93-95 RX-7 / RX-8

Rear Pinion Bearing - 93-95 RX-7 / RX-8

Rear Pinion Bearing - When replacing the pinion in any differential, it is wise to replace the pinion bearings, locknut and seal, and mandatory to change the crush tube. The parts we offer are Mazda factory parts.

Rear Pinion Bearing - 93-95 RX-7 / RX-8

Ring and Pinion Gear Set - 4.30 Ratio - 93-95 RX-7 / RX-8

Ring and Pinion Gear Set - 4.30 Ratio - 93-95 RX-7 / RX-8

The Mazda 4.30 ratio ring and pinion set is suitable use on the following rotary application: 1993-1995 Twin Turbo RX-7 and RX-8.

Alternate axle ratios are available for special applications. These ratios interchange exactly with the... Ring and Pinion Gear Set - 4.30 Ratio - 93-95 RX-7 / RX-8

Differential Front Seal  - 93-95 RX-7

Differential Front Seal - 93-95 RX-7

Differential Front Seal - When replacing the pinion in any differential, it is wise to replace the pinion bearings, locknut and seal, and mandatory to change the crush tube. The parts we offer are Mazda factory parts.

Differential Front Seal  - 93-95 RX-7

Go to Racing Beat Home Page
Select: Go to Shopping Cart