1986-92 Mazda RX-7 Performance Parts :

 :  : Front Suspension Lowering Kit - Street 86-92 RX-7

Front Suspension Lowering Kit - Street
86-92 RX-7

Part Number: 14000

Price: $255.00

Qty:

Front Suspension Lowering Kit - Street - 86-92 RX-7 - Detail 1Front Suspension Lowering Kit - Street - 86-92 RX-7 - Detail 2

Addtional Photos - Select to Enlarge

Facebook Share

Front Suspension Lowering Kit - Street
86-92 RX-7

The RX-7 Front Suspension Lowering Kit utilizes Racing Beat-modified Mazda OE top strut mounts to lower the front of the 1986-1992 RX-7 approximately 3/4-inch, without adversely affecting wheel travel or ride comfort. This kit is not intended for use on vehicles equipped with the original "Auto Adjust Suspension" components.

The RX-7 lowering kit is a bolt-on design that does not require any cutting of the strut towers and may be used with our Racing Beat Suspension Spring Set to further lower ride height. The mounts used in this kit are based on the standard Mazda RX-7 mounts, if you prefer to use a kit with a stiffer rubber bushing material see Competition Front Suspension Mounts.

Sold as a pair.

A Product Of Racing Beat Fabrication ServicesA Product Of Racing Beat Fabrication Services.

Customers who bought the above item also often bought:

Flywheel Stopper Bar Tool

Flywheel Stopper Bar Tool

The Flywheel Stopper Bar Tool is normally required whenever the flywheel retaining nut is being removed or installed. The Racing Beat Stopper Bar bolts to either the flywheel (except Tilton) or the automatic transmission flex plate and prevents the... Flywheel Stopper Bar Tool

Stock Flywheel Puller Tool

Stock Flywheel Puller Tool

The Stock Flywheel Puller Tool will remove any stock Mazda flywheel from its taper press fit on the eccentric shaft once the flywheel nut is loosened. This easy-to-use tool is a "must have" for any serious rotary mechanic!

Stock Flywheel Puller Tool

Sport/Race 4-Puck Clutch Disc - 83-92 RX-7 N/T

Sport/Race 4-Puck Clutch Disc - 83-92 RX-7 N/T

The Sport/Race Clutch Disc for the 1983-92 RX-7 chassis (12A & 13B 6-Port Non-Turbo) is designed for road race and occasional drag race use. The disc features four (4) sintered copper pucks and a sprung hub for a quick, positive engagement. The... Sport/Race 4-Puck Clutch Disc - 83-92 RX-7 N/T

REV TII Exhaust System - 87-91 TURBO II

REV TII Exhaust System - 87-91 TURBO II

1987-91 RX-7 TURBO REV II Complete High Performance Exhaust System - If you own a TURBO II RX-7 and you've found your way to this webpage, congratulations! Why? Because your search for an exhaust system for your car ends here. Simply put, this is... REV TII Exhaust System - 87-91 TURBO II

Go to Racing Beat Home Page
Select: Go to Shopping Cart