1986-92 Mazda RX-7 Performance Parts : Suspension - Components

: Suspension - Components : Rear Sway Bar Bushing 5/8-inch ID diameter

Rear Sway Bar Bushing
5/8-inch ID diameter

Part Number: 95258

Price: $6.00

Qty:

Addtional Photos - Select to Enlarge

Facebook Share

Rear Sway Bar Bushing
5/8-inch ID diameter

 These bushings are offered as direct replacements for the bushings that were originally supplied with your Racing Beat Miata rear sway bar (5/8-inch OD). Check the chart below for your specific application and part number. All bushings are sold individually, two (2) required per bar. We also offer specially formulated Prothane grease to lubricate the surface between the sway bar and bushing. One tube required per bar. (Actual part not shown.)

Bushing Part No.
(Bushings Sold Individually)		 Racing Beat Sway Bar Part No. & Vehicle Application
(2 Bushings Required Per Sway Bar)
95240
Endlink Bushing		 14100 - 1979-85 RX-7 Front Endlink (4 per side = 8 total)
14102 - 1979-85 RX-7 Rear Endlink (4 per side = 8 total)
95243 14102 - 1979-85 RX-7 Sway Bar - Rear
95246 14100 - 1979-85 RX-7 Sway Bar - Front
14103 - 1986-92 RX-7 Sway Bar - Front
54103 - 1999-00 Miata Sway Bar - Front
54104 - 1990-93 Miata Sway Bar (Tubular) - Front
54105 - 1994-97 Miata Sway Bar (Tubular) - Front
54107 - 1990-97 Miata Sway Bar - Race Front
95258 14104 - 1986-92 RX-7 Sway Bar - Rear
54101 - 1990-05 Miata Sway Bar - Rear
95828 14109 - 2006-08 RX-8/MX-5 Sway - Rear
54109 - 2006+ MX-5 Sway Bar - Rear
95991 54108 - 2006+ MX-5 - Front
95992 74103 - 2010+ Mazda 3 - Front
95993 74102 - 2007-09 Mazda 3 Sway Bar - Rear
95995 70100 - 2003-08 Mazda 6 Sway Bar - Front
74100 - 2004-09 Mazda 3 Sway Bar - Front
95996 70101 - 2003-08 Mazda 6 Sway Bar - Rear
74101 - 2004-06 Mazda 3 Sway Bar - Rear
74104 - 2010+ Mazda3 Sway Bar - Rear
95997 14106 - 1993-95 RX-7 Sway Bar - Rear
14109 - 2004-05 RX-8/MX-5 Sway Bar - Rear
96007 14107 - 1993-95 RX-7 Sway Bar - Front
14108 - 2006-08 RX-8 Sway Bar - Front
54106 - 2001-05 Miata Sway Bar - Front
96008 54100 - 1990-93 Miata Sway Bar (Solid) - Front
54102 - 1994-97 Miata Sway Bar (Solid) - Front

Customers who bought the above item also often bought:

Prothane Super Grease

Prothane Super Grease

We offer packets of Prothane Super Grease for use on any urethane bushing component. These are same packets that we supply with our sway bar kits. Each packet can be used to lubricate at least one sway bar.

Front Sway Bar Bushing - 7/8-inch ID diameter

Front Sway Bar Bushing - 7/8-inch ID diameter

These urethane bushings can be used to replace a set of worn-out original units. These bushings are offered as direct replacements for the bushings that were originally supplied with your Racing Beat sway bar. Check the chart below for your specific...

Urethane Differential Mount Bushing Kit - 90-05 Miata

Urethane Differential Mount Bushing Kit - 90-05 Miata

Prothane Urethane Differential Mount Bushing Kit - (Prothane 12-1601) This kit contains the bushings and sleeves required to replace the stock differential mount bushings on the 1990-2005 Miata. Priced and sold as a pair.


Sway Bar End Links - 90-97 Miata Front & Rear

Sway Bar End Links - 90-97 Miata Front & Rear

Application: 1990-1997 Miata Front - Our popular Racing Beat-designed Miata sway bar end links are a direct swap with the Miata factory links for all 1990-1997 Miatas (front and rear) and provide the performance enthusiast the ability to set either...

Go to Racing Beat Home Page
Select: Go to Shopping Cart