1986-92 Mazda RX-7 Performance Parts : Intake Weber

 : Intake - Weber : Weber Carb - 51 IDA Down Draft

Weber Carb - 51 IDA
Down Draft *

Part Number: 16602

Price: $898.00

Qty:

Addtional Photos - Select to Enlarge

Facebook Share

Weber Carb - 51 IDA
Down Draft *

Both the elegant design and the simplicity in the maintenance of the WEBER Carburetors have proven to be compelling reasons as to why the Weber name has remained so popular over the years.

The Weber 51 IDA carburetor is a special Racing Beat modification to a standard 48 IDA unit. This extensive modification involves machining the main body for larger throttle plates, fitting larger aluminum air horns, changing the needle valve, emulsion tubes, venturis, main jets, and air jets to work more effectively on the 13B peripheral port engine. As an alternate to the K&N Air Filter Assembly Kit, we supply an information sheet detailing our recommendations for the design of a cold air box.

While the Racing Beat-modified 51 IDA Carburetor is intended for use on 1974-85 12A & 1974-85 13B 4-Port engines, as delivered, the Racing Beat-modified 51 IDA carburetor is tuned for a 13B peripheral port engine.

The Weber carburetor is well suited for various race applications because of its simplicity, compactness, tunability and excellent float bowl design. As applied to a rotary engine, the carburetor exhibits a variety of good characteristics. However, in a stock or street-ported engine this carburetor's lack of a choke system makes it very cold-blooded, even in warm climates.

The Weber 51 IDA carburetor is also suitable for use on a number of rotary engine applications, including a 13B bridge or J-bridge ported engine, or the 12A peripheral ported engine. If the 51 IDA carb is intended for use on these engines; we offer the appropriate Weber components to properly tune the carb for these applications. Follow this link for a listing of tuning recommendations for various rotary engine applications. (PDF)

However, the one application where the Weber 51 IDA carburetor performs best is on a peripheral ported 13B engine. Here, its relatively small size is compensated by the excellent breathing capability of the porting on the engine. Although the 48 IDA carb can be used on a 12A peripheral port engine, power can be increased by approximately 10+HP if an upgrade is made to the 51 IDA unit!

The selection of an appropriate intake system requires that many factors be taken into consideration. Various intake systems yield different performance characteristics based upon specific engine, exhaust and driveline selections. Due to the complexities associated with these configurations, it is difficult to determine exact power gains for specific applications. Use this intake reference guide (PDF) for performance comparisons between the Weber and Holley Intake systems that we offer.

.

* Legal in California only for racing vehicles, which may never be used upon a highway.
  What does this mean? Click Frequently Asked Questions About Emission Laws And Regulations.
A Product Of Racing Beat Fabrication ServicesA Product Of Racing Beat Fabrication Services.

Customers who bought the above item also often bought:

Weber Carb Base/Phenolic Spacer Gasket

Weber Carb Base/Phenolic Spacer Gasket

The Weber Carburetor Base and Phenolic Spacer Gaskets are used at the base of the carburetor, or on either side of the phenolic spacer. Sold individually, order the quantity required for your specific application. (Note: Two gaskets... Weber Carb Base/Phenolic Spacer Gasket

Phenolic Intake Spacers - 48 IDA & 51 Weber IDA Carb

Phenolic Intake Spacers - 48 IDA & 51 Weber IDA Carb

The Weber 48/51 IDA Phenolic Intake Spacers can be installed under a 48/51 IDA carburetor to increase the intake manifold length for special applications. Test have shown that up to three spacers per barrel can be used to move the torque peak down... Phenolic Intake Spacers - 48 IDA & 51 Weber IDA Carb

Weber Intake Manifold 48/51 IDA - 87-91 TURBO II

Weber Intake Manifold 48/51 IDA - 87-91 TURBO II

The Racing Beat-designed and manufactured cast-aluminum intake manifold is intended for use on a 1987-91 13B TURBO II engine with a Weber 48 IDA or the Racing Beat-modified 51 IDA carburetor (additional porting required).

These optional... Weber Intake Manifold 48/51 IDA - 87-91 TURBO II

Accelerator Cable Linkage - 48/51 IDA(Bell Crank)

Accelerator Cable Linkage - 48/51 IDA(Bell Crank)

The Accelerator Cable Linkage (Bell Crank), compatible with the Weber 48IDA and 51 IDA carburetors, is intended for Left-Hand drive rotary chassis using a Left-Hand drive-configured manifold. This linkage mounts to the end of the throttle shaft and... Accelerator Cable Linkage - 48/51 IDA(Bell Crank)

Go to Racing Beat Home Page
Select: Go to Shopping Cart