1993-95 Mazda RX-7 Performance Parts : Clutch/Pressure Plate

 : Clutch/Pressure Plate : Sport/Strip HD Clutch Disc 87-95 RX-7 TURBO

Sport/Strip HD Clutch Disc
87-95 RX-7 TURBO

Part Number: 12508

Price: $174.00

Qty:

Addtional Photos - Select to Enlarge

Facebook Share

Sport/Strip HD Clutch Disc
87-95 RX-7 TURBO

Proven to be one of our most popular performance replacement clutch discs, the Sport/Strip Heavy Duty 240mm Clutch Disc for the 1987-95 RX-7 TURBO chassis utilizes flattened marcel springs to reduce flexing, and two rivets per marcel to increase lining strength. The result is a disc that requires a bit more technique when starting, and releases quicker. This disc is suited for high output street engines and works with the stock pressure plate.

Time Saving Tip: We strongly recommend replacing the throw-out bearing during any clutch work to ensure trouble free performance. Also, we recommend replacing the transmission front and rear seal kit when re-installing the transmission to reduce the possibility of leakage.

WARNING: None of the Flywheel or Clutch components shown in this catalog should ever be allowed to exceed 10,500 RPM under any condition. This same RPM limit applies to stock components. You must use an engine RPM-limiter to prevent excessive RPM. If your RX-7 engine is capable of exceeding 8,500 RPM you must install a transmission scatter shield, or ballistic blanket. Failure to implement the above may result in serious injury or even death.

Customers who bought the above item also often bought:

Oil Hose Adapter Fitting - 16MM to -10 Hose

Oil Hose Adapter Fitting - 16MM to -10 Hose

We offer the Racing Beat Oil Cooler Hose Adapter Fittings to simplify oil system plumbing. These fittings adapt the 16mm female metric threads in the front cover (1971-95 rotary engines) and oil cooler (1971-85 stock or factory race) to accept -10... Oil Hose Adapter Fitting - 16MM to -10 Hose

Aluminum Alternator Pulley -Double Sheave - 74-92 Rotary Engines (All)

Aluminum Alternator Pulley -Double Sheave - 74-92 Rotary Engines (All)

The Racing Beat-designed Double Sheave Aluminum Alternator Pulley reduces alternator RPM approximately 20% from stock RPM, and is intended for high performance and moderate race use. It is compatible with either the stock main pulley, or assuming... Aluminum Alternator Pulley -Double Sheave - 74-92 Rotary Engines (All)

Rotor Oil Filler Cap

Rotor Oil Filler Cap

The Racing Beat-designed and manufactured Rotor Oil Filler Cap fits All Mazda 12A and 13B Rotary Engines Except: 1993-95 RX-7, 2004-08 Auto-trans RX-8, 2009 RX-8 ALL)

Yes, we know that there are many "rotor shaped" oil caps... Rotor Oil Filler Cap

Carbon Race Apex Seal - 86-92 Non-Turbo

Carbon Race Apex Seal - 86-92 Non-Turbo

Racing Beat's 1986-92 13B Non-Turbo (2mm) Carbon Race Apex Seals are specifically designed to replace the stock cast iron apex seals in rotary engines operating near, or above, 8,500 RPM. These aluminum-filled carbon apex seals are a one-piece... Carbon Race Apex Seal - 86-92 Non-Turbo

Go to Racing Beat Home Page
Select: Go to Shopping Cart