1993-95 Mazda RX-7 Performance Parts : Clutch/Pressure Plate

 : Clutch/Pressure Plate : Sport/Race 6-Puck Clutch Disc 87-95 RX-7 Turbo & RX-8

Sport/Race 6-Puck Clutch Disc
87-95 RX-7 Turbo & RX-8

Part Number: 12523

Price: $288.75

Qty:

Addtional Photos - Select to Enlarge

Sport/Race 6-Puck Clutch Disc
87-95 RX-7 Turbo & RX-8

Sport/Race Stage 2 Clutch Disc
6-Puck design - 240mm OD
1987-95 RX-7 Turbo & 2004-2011 RX-8


The Sport 6-Puck Clutch Disc is designed for the 1987-95 RX-7 Turbo & RX-8 engine and is best suited for autocross, road race and occasional drag race use. The 240mm OD disc features six (6) sintered copper pucks and a sprung hub for a very quick, positive engagement. The quick engagement/disengagement requires careful driver attention - this disc is not recommended for street use. This disc interchanges exactly with the stock pressure plate/flywheel or compatible.

Time Saving Tip: We strongly recommend replacing the throw-out bearing during any clutch work to ensure trouble free performance. Also, we recommend replacing the transmission front and rear seal kit when re-installing the transmission to reduce the possibility of leakage.

Safety Note: None of the Racing Beat, Exedy, Mazda OE, or any aftermarket flywheel or clutch replacement components should ever be allowed to exceed 10,500 RPM under any condition. You must use an engine RPM-limiter to prevent excessive RPM. If your engine is capable of exceeding 8,500 RPM we highly recommend the installation of a transmission scatter shield or ballistic blanket. Failure to implement the above may result in serious injury or even death.

Actual disc not shown in photo.

Made in the USAMade in the USA under license by Racing Beat, Inc.
Prop65Warning

Customers who bought the above item also often bought:

Clutch Alignment Tool - 23 Teeth - 87-95 13B Turbo / RX-8

Clutch Alignment Tool - 23 Teeth - 87-95 13B Turbo / RX-8

This 23-tooth clutch disc alignment tool simplifies clutch installation considerably by aligning the clutch disc splines with the eccentric shaft pilot bearing. Although you'll likely use this tool only once or twice during the life of your car,... »more
Price: $5.25 ADD »

Oil Hose Adapter Fitting - 16MM to -10 Hose

Oil Hose Adapter Fitting - 16MM to -10 Hose

We offer the Racing Beat Oil Cooler Hose Adapter Fittings to simplify oil system plumbing. These fittings adapt the 16mm female metric threads in the 1971-95 rotary engine front cover and 1971-85 oil cooler (stock or factory race version) to accept -10... »more
Price: $20.62 ADD »

Aluminum Alternator Pulley -Double Sheave - 74-92 Rotary Engines (All)

Aluminum Alternator Pulley -Double Sheave - 74-92 Rotary Engines (All)

Double Sheave Aluminum Alternator Pulley 74-92 Rotary Engines (All) The Racing Beat-designed alternator pulley reduces alternator RPM approximately 20% from stock RPM, and is intended for high performance and moderate race use. It is compatible with... »more
Price: $76.41 ADD »

Rotor Oil Filler Cap

Rotor Oil Filler Cap

The Racing Beat-designed and manufactured Rotor Oil Filler Cap fits All Mazda 12A and 13B Rotary Engines Except: 1993-95 RX-7, 2004-08 Auto-trans RX-8, 2009 RX-8 ALL) Yes, we know that there are many "rotor shaped" oil caps available on... »more
Price: $49.61 ADD »

Go to Racing Beat Home Page
Select: Go to Shopping Cart