1993-95 Mazda RX-7 Performance Parts : Clutch/Pressure Plate

 : Clutch/Pressure Plate : Race 6-Puck Clutch Disc 87-95 RX-7 Turbo & RX-8

Race 6-Puck Clutch Disc
87-95 RX-7 Turbo & RX-8

Part Number: 12524

Price: $288.75

Qty:

Addtional Photos - Select to Enlarge

Race 6-Puck Clutch Disc
87-95 RX-7 Turbo & RX-8

The Race 6-Puck Clutch Disc for the 1987-95 RX-7 TURBO & RX-8 (240mm OD) is designed for drag and road race use. The disc incorporates six (6) sintered copper pucks and a solid hub for quick, positive engagement, greater fatigue resistance and improved heat dissipation. The sharpened engagement/disengagement characteristics of this disc require careful driver attention - this disc is not intended for street use.

Time Saving Tip: We strongly recommend replacing the throw-out bearing during any clutch work to ensure trouble free performance. Also, we recommend replacing the transmission front and rear seal kit when re-installing the transmission to reduce the possibility of leakage.

WARNING: None of the Flywheel or Clutch components shown in this catalog should ever be allowed to exceed 10,500 RPM under any condition. This same RPM limit applies to stock components. You must use an engine RPM-limiter to prevent excessive RPM. If your engine is capable of exceeding 8,500 RPM you must install a transmission scatter shield, or ballistic blanket. Failure to implement the above may result in serious injury or even death.

Prop65Warning

Customers who bought the above item also often bought:

Street/Strip Pressure Plate - 87-91 TURBO II

Street/Strip Pressure Plate - 87-91 TURBO II

The 1987-91 TURBO II High Performance Pressure Plate provides excellent clamping force to significantly reduce slipping. Manufactured from all new parts, this pressure plate interchanges exactly with the stock unit. Time Saving Tip: We strongly... »more
Price: $350.00 ADD »

RX-7/RX-8 Flywheel - Aluminum - 87-95 RX-7 Turbo / RX-8

RX-7/RX-8 Flywheel - Aluminum - 87-95 RX-7 Turbo / RX-8

Racing Beat-designed RX-7 flywheels are both engineered and manufactured by Racing Beat for a wide variety of rotary performance applications. This Racing Beat Aluminum Flywheel can be used on all 1987-95 RX-7 13B turbo engine and all... »more
Price: $550.00 ADD »

Aluminum Flywheel Mounting Hardware Kit - 87-95 RX-8 / RX-8

Aluminum Flywheel Mounting Hardware Kit - 87-95 RX-8 / RX-8

This kit contains the required hardware to mount a Racing Beat Aluminum Flywheel to any 1987-91 Turbo II, 1993-95 RX-7, or 2004-2011 RX-8 Renesis engine.  The kit also includes the small spacers required for mating the pressure plate to... »more
Price: $25.47 ADD »

Oxygen Sensor Fitting - Stainless Steel

Oxygen Sensor Fitting - Stainless Steel

Commonly referred to as a oxygen sensor "bung", this stainless steel fitting can be installed onto any exhaust component that requires an oxygen sensor. This fitting can also be used when installing a wide-band oxygen sensor or an exhaust gas... »more
Price: $13.35 ADD »

Go to Racing Beat Home Page
Select: Go to Shopping Cart