1993-95 Mazda RX-7 Performance Parts : Clutch/Pressure Plate

 : Clutch/Pressure Plate : Transmission Throwout Bearing 93-95 RX-7

Transmission Throwout Bearing
93-95 RX-7

Part Number: 12615

Price: $76.37

Qty:

Transmission Throwout Bearing - 93-95 RX-7 - Detail 1

Addtional Photos - Select to Enlarge

Facebook Share

Transmission Throwout Bearing
93-95 RX-7

The original throwout bearing normally does not require replacement unless it has been abused in some way. However, if it has been making noise, such as a whirring sound when the clutch pedal is depressed, or if the slave linkage has run out of clearance, replacement is wise. Any roughness felt in the bearing after it is removed is cause for replacement. This throwout bearing is a Mazda OEM part.

Genuine Mazda PartGenuine Mazda Part.
Prop65Warning

Customers who bought the above item also often bought:

Transmission Seal Kit - 93-95 RX-7

Transmission Seal Kit - 93-95 RX-7

We recommend replacing the transmission front seal and rear seal kit when re-installing the transmission to reduce the risk of leakage. The primary reason for leaks seems to be the large loads that are placed on the input shaft when re-installing the... Transmission Seal Kit - 93-95 RX-7

Clutch Alignment Tool - 23 Teeth - 87-95 13B Turbo / RX-8

Clutch Alignment Tool - 23 Teeth - 87-95 13B Turbo / RX-8

This 23-tooth clutch disc alignment tool simplifies clutch installation considerably by aligning the clutch disc splines with the eccentric shaft pilot bearing. Although you'll likely use this tool only once or twice during the life of your car,... Clutch Alignment Tool - 23 Teeth - 87-95 13B Turbo / RX-8

Goodridge Stainless Steel Clutch Line - 93-95 RX-7 / 90-97 Miata

Goodridge Stainless Steel Clutch Line - 93-95 RX-7 / 90-97 Miata

Goodridge Stainless Steel Clutch Line Applications: 1993-95 RX7 1990-97 Miata Replace the original rubber clutch line on your RX-7 or Miata with an upgraded Goodridge braided stainless steel line. Older rubber hoses tend to expand slightly as... Goodridge Stainless Steel Clutch Line - 93-95 RX-7 / 90-97 Miata

Muffler Hanger - Rear - 93-95 RX-7

Muffler Hanger - Rear - 93-95 RX-7

This Racing Beat stainless-steel muffler hanger can be used on the stock 1993-95 RX-7 Mazda muffler, the Racing Beat muffler, or a comparable aftermarket muffler. This hanger bolts to a small flange that is mounting to the rear of the canister. ... Muffler Hanger - Rear - 93-95 RX-7

Go to Racing Beat Home Page
Select: Go to Shopping Cart