1993-95 Mazda RX-7 Performance Parts : Engine Internal Parts

 : Engine - Internal Parts : Type II Stationary Gear Bearing

Type II Stationary Gear Bearing

Part Number: 11116

Price: $64.78

Qty:

Addtional Photos - Select to Enlarge

Facebook Share

Type II Stationary Gear Bearing

The Type II Stationary Gear Bearing is intended for use with the Racing Beat-Modified Front and Rear Type II Stationary Gears (Part numbers 10016 & 10017 respectively). These bearings are not intended for use with the Racing Beat Front and Rear Type I Stationary Gears.

Genuine Mazda PartGenuine Mazda Part.

Customers who bought the above item also often bought:

Renesis Engine Gasket Kit - 2004-08 High Power (13B Six Port) Manual Trans and 2006-08 AutoTrans RX-8

Renesis Engine Gasket Kit - 2004-08 High Power (13B Six Port) Manual Trans and 2006-08 AutoTrans RX-8

Racing Beat offers the MAZDA OEM Engine Gasket  Kit for use on all 2004-2008 High Power (13B Six Port) manual transmission RX-8 Renesis engines and all 2006-2008 High Power (13B Six Port) automatic transmission RX-8 Renesis... Renesis Engine Gasket Kit - 2004-08 High Power (13B Six Port) Manual Trans and 2006-08 AutoTrans RX-8

Type II Modified Stationary Gear - 13B Front

Type II Modified Stationary Gear - 13B Front

Our Racing Beat Type II Modified 13B Front Stationary Gears are based on the 1992-1995 stock front stationary gears, with the same Racing Beat modifications found on the Type I stationary gears. Additionally, the Racing Beat Type II modified... Type II Modified Stationary Gear - 13B Front

Mazda Race Rotor Bearing - 12A & 13B

Mazda Race Rotor Bearing - 12A & 13B

The Mazda Factory Race (MFR) rotor bearings for all 12A & 13B engines are the best bearings available of engine operation near or above 8500 RPM. The rotor bearings are manufactured with a deep groove for additional oil storage and offer an... Mazda Race Rotor Bearing - 12A & 13B

Type II Modified Stationary Gear - 13B Rear

Type II Modified Stationary Gear - 13B Rear

Our Racing Beat Type II Modified 13B Rear Stationary Gears are based on the 1992 stock rear stationary gears, with the same Racing Beat modifications found on the Type I stationary gears, and are intended for 13B engines only. Additionally, the... Type II Modified Stationary Gear - 13B Rear

Go to Racing Beat Home Page
Select: Go to Shopping Cart