1993-95 Mazda RX-7 Performance Parts : Exhaust Gaskets

 : Exhaust - Gaskets : Engine-to-Exhaust Manifold Gasket 93-5 RX-7

Engine-to-Exhaust Manifold Gasket
93-5 RX-7

RB Part Number: 16317

Mazda
N3A1-13-461

Price: $50.00

Qty:

Engine-to-Exhaust Manifold Gasket - 93-5 RX-7 - Detail 1

Addtional Photos - Select to Enlarge

Facebook Share

Engine-to-Exhaust Manifold Gasket
93-5 RX-7

We offer the Mazda OEM high temperature gasket (Mazda Part Number N3A1-13-461) that is "sandwiched" between the Engine and the Turbocharger Manifold on the 1993-95 Twin Turbo RX-7 at an extremely attractive price:  less than half the price you would typically pay at a Dealership.  This multi-layered, high temperature, stainless steel gasket is a genuine Mazda factory part. Two (2) gaskets are required for one engine.  Gaskets are priced individually.   

Genuine Mazda PartGenuine Mazda Part.
Prop65Warning

Customers who bought the above item also often bought:

Exhaust Gasket - 3-inch ID

Exhaust Gasket - 3-inch ID

flange-gasket-guide.pdf This 3" ID exhaust gasket (80mm) can be used on the following Racing Beat components: RX-7 Muffler (and connecting pipe) This exhaust gasket can be used between the muffler and connecting pipe on the... Exhaust Gasket - 3-inch ID

Intake Gasket - 1993-95 RX-7

Intake Gasket - 1993-95 RX-7

The Mazda Factory 1993-95 Twin Turbo 13B Engine-to-Manifold gasket (N3A1-13-111C) is a riveted, multi-layer stamped steel construction that fits securely between the intake manifold and the engine. Intake Gasket - 1993-95 RX-7

ULTRA Ignition Wires - 93-95 RX-7

ULTRA Ignition Wires - 93-95 RX-7

We offer ULTRA Ignition Wire sets for both street and race-application 1993-95 Twin Turbo RX-7 chassis. The Street Wire Set combines excellent radio noise suppression (5k Ohm resistance) with peak ignition performance, while the Race Wire Set provides... ULTRA Ignition Wires - 93-95 RX-7

Replacement Friction Plate - RX-8/RX-7 Turbo

Replacement Friction Plate - RX-8/RX-7 Turbo

The Racing Beat-manufactured Replacement Friction Plate is intended to replace the worn or damaged 240mm OD friction plate on all 1987-95 Turbo RX-7 and RX-8 Racing Beat Aluminum Flywheels. (Compatible with Racing Beat flywheels only.) Simply unbolt the... Replacement Friction Plate - RX-8/RX-7 Turbo

Go to Racing Beat Home Page
Select: Go to Shopping Cart