1993-95 Mazda RX-7 Performance Parts : Exhaust Gaskets

 : Exhaust - Gaskets : Engine-to-Exhaust Manifold Gasket 93-5 RX-7

Engine-to-Exhaust Manifold Gasket
93-5 RX-7

RB Part Number: 16317

Mazda
N3A1-13-461

Price: $50.00

Qty:

Engine-to-Exhaust Manifold Gasket - 93-5 RX-7 - Detail 1

Addtional Photos - Select to Enlarge

Facebook Share

Engine-to-Exhaust Manifold Gasket
93-5 RX-7

We offer the Mazda OEM high temperature gasket (Mazda Part Number N3A1-13-461) that is "sandwiched" between the Engine and the Turbocharger Manifold on the 1993-95 Twin Turbo RX-7 at an extremely attractive price:  less than half the price you would typically pay at a Dealership.  This multi-layered, high temperature, stainless steel gasket is a genuine Mazda factory part. Two (2) gaskets are required for one engine.  Gaskets are priced individually.   

Genuine Mazda PartGenuine Mazda Part.

Customers who bought the above item also often bought:

Replacement Friction Plate - RX-8/RX-7 Turbo

Replacement Friction Plate - RX-8/RX-7 Turbo

The Racing Beat-manufactured Replacement Friction Plate is intended to replace the worn or damaged 240mm friction plate on all 1987-95 Turbo RX-7 and RX-8 Racing Beat Aluminum Flywheels only. Simply unbolt the worn or damaged, and attach the new... Replacement Friction Plate - RX-8/RX-7 Turbo

Intake Gasket - 1993-95 RX-7

Intake Gasket - 1993-95 RX-7

The Mazda Factory 1993-95 Twin Turbo 13B Engine-to-Manifold gasket (N3A1-13-111C) is a riveted, multi-layer stamped steel construction that fits securely between the intake manifold and the engine.

Intake Gasket - 1993-95 RX-7

Intake Gasket - 20B 3-Rotor Engine

Intake Gasket - 20B 3-Rotor Engine

The 20B 3-Rotor Engine Engine-to-Manifold Mazda Factory gasket is intended to fit securely between the intake manifold and the engine.

Intake Gasket - 20B 3-Rotor Engine

Transmission Throwout Bearing - 93-95 RX-7

Transmission Throwout Bearing - 93-95 RX-7

The original throwout bearing normally does not require replacement unless it has been abused in some way. However, if it has been making noise, such as a whirring sound when the clutch pedal is depressed, or if the slave linkage has run out of... Transmission Throwout Bearing - 93-95 RX-7

Go to Racing Beat Home Page
Select: Go to Shopping Cart