1993-95 Mazda RX-7 Performance Parts : Flywheels

 : Flywheels : Replacement Friction Plate RX-8/RX-7 Turbo

Replacement Friction Plate
RX-8/RX-7 Turbo

Part Number: 11432

Price: $97.00

Qty:

Replacement Friction Plate - RX-8/RX-7 Turbo - Detail 1

Addtional Photos - Select to Enlarge

Facebook Share

Replacement Friction Plate
RX-8/RX-7 Turbo

The Racing Beat-manufactured Replacement Friction Plate is intended to replace the worn or damaged 240mm friction plate on all 1987-95 Turbo RX-7 and RX-8 Racing Beat Aluminum Flywheels only. Simply unbolt the worn or damaged, and attach the new replacement with the hardware and instructions provided.

Made in the USAMade in the USA by Racing Beat, Inc.

Customers who bought the above item also often bought:

Aluminum Flywheel Mounting Hardware Kit - 87-95 RX-8 / RX-8

Aluminum Flywheel Mounting Hardware Kit - 87-95 RX-8 / RX-8

This kit contains the required hardware to mount a Racing Beat Aluminum Flywheel to any 1987-91 Turbo II, 1993-95 RX-7, or 2004-2011 RX-8 Renesis engine.

 The kit also includes the small spacers required for mating the pressure... Aluminum Flywheel Mounting Hardware Kit - 87-95 RX-8 / RX-8

Engine-to-Exhaust Manifold Gasket - 93-5 RX-7

Engine-to-Exhaust Manifold Gasket - 93-5 RX-7

We offer the Mazda OEM high temperature gasket (Mazda Part Number N3A1-13-461) that is "sandwiched" between the Engine and the Turbocharger Manifold on the 1993-95 Twin Turbo RX-7 at an extremely attractive price:  less than half... Engine-to-Exhaust Manifold Gasket - 93-5 RX-7

Hylomar Gasket Sealer

Hylomar Gasket Sealer

Hylomar is a non-hardening gasket sealer that leaves the tube as a thin paste which then thickens after a few minutes. This allows the sealer to be brushed onto each component with relative ease. Hylomar not only improves the sealing of the rotor... Hylomar Gasket Sealer

Intake Gasket - 1993-95 RX-7

Intake Gasket - 1993-95 RX-7

The Mazda Factory 1993-95 Twin Turbo 13B Engine-to-Manifold gasket (N3A1-13-111C) is a riveted, multi-layer stamped steel construction that fits securely between the intake manifold and the engine.

Intake Gasket - 1993-95 RX-7

Go to Racing Beat Home Page
Select: Go to Shopping Cart