Flywheel Stopper Bar Tool

The Flywheel Stopper Bar Tool is normally required whenever the flywheel retaining nut is being removed or installed. The Racing Beat Stopper Bar bolts to either the flywheel (except Tilton) or the automatic transmission flex plate and prevents the...

Stock Flywheel Puller Tool

The Stock Flywheel Puller Tool will remove any stock Mazda flywheel from its taper press fit on the eccentric shaft once the flywheel nut is loosened. This easy-to-use tool is a "must have" for any serious rotary mechanic!

Grinding Stone - Ball Shape

This grinding stone has the following specifications:
Grinding stone, ball shaped, 1/8" shank diameter by 3 1/2" overall length (stone 1/2" diameter). Our experience has shown that an average of four (4) grinding stones are...

Sandpaper Strip - 220 Fine Grit - Roll

These sandpaper strips have the following specifications:
Sandpaper strip roll 220 (fine) grit- This roll is 1" wide and 24" long. Intended for use with the sandpaper mandrel.

We've taken...