1993-95 Mazda RX-7 Performance Parts : Flywheels

 : Flywheels : Stock Flywheel Puller Tool

Stock Flywheel Puller Tool

Part Number: 22002

Price: $38.00

Qty:

Addtional Photos - Select to Enlarge

Facebook Share

Stock Flywheel Puller Tool

The Stock Flywheel Puller Tool will remove any stock Mazda flywheel from its taper press fit on the eccentric shaft once the flywheel nut is loosened. This easy-to-use tool is a "must have" for any serious rotary mechanic!

Made in the USAMade in the USA by Racing Beat, Inc.

Customers who bought the above item also often bought:

Flywheel Nut Wrench Tool

Flywheel Nut Wrench Tool

Having the correct tool always makes the job seem easy, right? Although you probably won't be using this tool much, it will certainly pay for itself even if you only use it once! The Flywheel Nut Wrench tool is used to remove or install the... Flywheel Nut Wrench Tool

Flywheel Stopper Bar Tool

Flywheel Stopper Bar Tool

The Flywheel Stopper Bar Tool is normally required whenever the flywheel retaining nut is being removed or installed. The Racing Beat Stopper Bar bolts to either the flywheel (except Tilton) or the automatic transmission flex plate and prevents the... Flywheel Stopper Bar Tool

Auto Transmission Balance Weight Puller Tool

Auto Transmission Balance Weight Puller Tool

The Automatic Transmission Balance Weight Puller Tool will remove any automatic transmission balance weight from its taper press fit on the eccentric shaft once the flywheel nut is loosened. This is the same balance weight used with all our... Auto Transmission Balance Weight Puller Tool

Transmission Seal Kit - 04-08 RX-8

Transmission Seal Kit - 04-08 RX-8

We recommend replacing the transmission front seal and rear seal kit when re-installing the transmission to reduce the risk of leakage. The primary reason for leaks seems to be the large loads that are placed on the input shaft when re-installing... Transmission Seal Kit - 04-08 RX-8

Go to Racing Beat Home Page
Select: Go to Shopping Cart