1993-95 Mazda RX-7 Performance Products : Oil System
Mazda OEM Oil Filter :: RX7, RX8, Protege, MiataThis OEM Mazda Oil Filter is intended for use on RX-7, RX-8, Protege & Protege 5, and Miata applications. It is recommended that the oil filter be replaced at the same time of an oil change. This is the genuine Mazda oil filter and is listed as part ... |
Earls 809110- Swivel Seal Fitting :: Hose end to 90 degree -10AN FemaleEarl's Swivel-Seal Hose Fitting 809110ERL - 90 degree -10 AN Female to -10 AN Hose This hose fitting can be used to connect an custom oil line to our Racing Beat oil line adaptor fittings (see below), or to any other -10 male fitting. Features - ... |
Earls 904610- Swivel Seal Fitting :: Hose end to 45 degree -10AN FemaleEarl's Swivel-Seal Hose Fitting 804610ERL - 45 degree -10 AN Female to -10 AN Hose This hose fitting can be used to connect an custom oil line to our Racing Beat oil line adaptor fittings (see below), or to any other -10 male fitting. Features - ... |
Earls 800110- Fitting :: Hose end to -10AN FemaleEarl's Hose Fitting 800110ERL - Hose end to -10 AN Hose This hose fitting can be used to connect an custom oil line to our Racing Beat oil line adaptor fittings (see below), or to any other -10 male fitting. Features - Stainless Retention Pins Allow ... |
Earls Hose Fitting :: Hose end to 90 degree 18mm MaleRacing Beat Exclusive - Earl's Swivel-Seal Hose Fitting - 90 degree 18mm Male to -10 AN Hose This specially-configured Earl's hose fitting can be used to connect an custom oil line to a 18mm female fitting, or to the 18mm... |
3/8-in Brass NPT AdapterThis AutoMeter adaptor (ATM-2263) can be used to fit a 5/8"-18 UNF gauge fitting (as supplied on Auto Meter Mechanical Temperature Gauges) onto the 3/8" NPT sensor position on the Racing Beat TYPE II Oil/Pressure Temperature unit. Sold ... |
Oil Filter Bypass Block Kit :: 79-95 Rotary EngineThe Racing Beat-designed and manufactured Oil Filter Bypass Block Kit facilitates the installation of any remote oil filter assembly for use on any 1979-95 rotary engine. Machined from aluminum-alloy with an internal passage that eliminates the location ... |
Remote Oil Filter Mount :: Single-Filter - HP1Typically used in racing applications, where both chassis clearance and the need for higher oil pressure operation are real concerns, the Remote Oil Filter Mount - Single Filter - simplifies the elimination of the stock oil filter mount by replacing it ... |
Remote Oil Filter Mount :: Double-Filter HP1Typically used in racing applications, where both chassis clearance and the need for higher oil pressure operation are real concerns, the Remote Oil Filter Mount--Double-Filter--simplifies the elimination of the stock oil filter mount by replacing it with... |
Oil Pressure Regulator - Race 105-115 PSIThe Mazda Factory Race (MFR) High Performance Rear Oil Pressure Regulator interchanges exactly with the stock rear oil pressure regulator on all 1971-2010 12A, 13B, and 20B engines. It is designed to bypass at 105-115 PSI. (Pressure this high should be ... |
Oil Pan Gasket :: 93-95 RX-7Racing Beat offers the genuine Mazda factory gasket to replace a worn original gasket. Price is for one (1) gasket. For use on any 1993-95 RX-7 application. |
Thermal Bypass Pellet Replacement :: 86 & laterThe Racing Beat Eccentric Shaft Thermal Bypass Pellet Replacement can be installed on any 1986 and later eccentric shaft. |
Dry Sump Kit :: 74-95 AllWe offer a variety of RATECH Dry Sump Kits for all 1974-95 12A, 13B and 20B engine applications. These Dry Sump Kits are intended for experienced, knowledgeable engine builders desiring an economical alternative to the more expensive Mazda Factory systems... Our Price $0.00 More Information Part Number: 11850 |
























