Mazda RX-8 Performance Parts : Clutch/Pressure Plate

 : Clutch/Pressure Plate : Exedy Clutch Kit - Stage 1 2009-11 RX-8

Exedy Clutch Kit - Stage 1
2009-11 RX-8

RB Part Number: 12651

EXEDY
10813

Price: $424.00

Qty:

Exedy Clutch Kit - Stage 1 - 2009-11 RX-8 - Detail 1

Addtional Photos - Select to Enlarge

Facebook Share

Exedy Clutch Kit - Stage 1
2009-11 RX-8

The Exedy Complete Clutch Kit Stage 1 for the 2009-11 Mazda RX-8 (EXEDY 10813) is recommended for Street or Autocross - excellent for daily-driven cars, track-days, or autocross use.

Exedy/Daikin Clutch  is one world's largest suppliers of both stock OEM and performance aftermarket clutch components. This complete Exedy Stage 1 clutch kit for the RX-8 includes a: sprung hub, organic compound disc (240 mm OD), upgraded pressure plate (232 ft/lbs wheel torque clamping load, 306 fl/lbs torque capacity at the flywheel), replacement throw out bearing, pilot bearing, and  clutch installation alignment tool. This complete kit is ideally suited for street or slightly modified chassis, and the drivability characteristics of the organic material disc are similar to the stock clutch. Increased pressure plate clamping loads provide the necessary capacity to handle the performance demands of modified engines and spirited driving. Although pedal loads will be slightly higher because of the increased clamping load, this kit is well suited for use on daily-driven cars. All Exedy discs feature a sprung-hub center to reduce drive train shock and to ease clutch engagement.

This is a complete kit at a great price! If you are considering replacing your clutch assembly with an aftermarket kit, the Exedy components offer a super combination of performance and value.

Packaged only as a set, these components are not available separately. Photo shown may not be specific to this application.

Customers who bought the above item also often bought:

RX-7/RX-8 Flywheel - Aluminum - 87-95 RX-7 Turbo / RX-8

RX-7/RX-8 Flywheel - Aluminum - 87-95 RX-7 Turbo / RX-8

Racing Beat-designed RX-7 flywheels are both engineered and manufactured by Racing Beat for a wide variety of rotary performance applications. This Racing Beat Aluminum Flywheel can be used on all 1987-95 RX-7 13B turbo engine and all... RX-7/RX-8 Flywheel - Aluminum - 87-95 RX-7 Turbo / RX-8

Tranmission Seal Kit - 09-11 RX-8

Tranmission Seal Kit - 09-11 RX-8

We recommend replacing the RX-8 transmission front and rear seals when re-installing the transmission to reduce the risk of leakage. The primary reason for leaks seems to be the large loads that are placed on the input shaft when re-installing the... Tranmission Seal Kit - 09-11 RX-8

Stainless Steel Clutch Line - 04-11 RX-8 / 06-14 MX-5

Stainless Steel Clutch Line - 04-11 RX-8 / 06-14 MX-5

Replace the original rubber clutch line on your 2004-11 RX-8 / 2006-14 MX-5 chassis with an upgraded braided stainless steel line. Can be used for both street and race applications. Stainless Steel Clutch Line - 04-11 RX-8 / 06-14 MX-5

Stock Flywheel Puller Tool

Stock Flywheel Puller Tool

The Stock Flywheel Puller Tool will remove any stock Mazda flywheel from its taper press fit on the eccentric shaft once the flywheel nut is loosened. This easy-to-use tool is a "must have" for any serious rotary mechanic! Stock Flywheel Puller Tool

Go to Racing Beat Home Page
Select: Go to Shopping Cart