Exhaust Hanger
Mulit-use RX-8/MX-5

Part Number: 56314

Price: $10.93

Qty:

Addtional Photos - Select to Enlarge

Exhaust Hanger
Mulit-use RX-8/MX-5

Exhaust Hanger - These genuine Mazda exhaust hangers (N3H2-40-061A) can be used to replace the old, worn rubber original units on your RX-8 or MX-5. If you are installing a new exhaust system it is worth considering the replacement of the original hangers to ensure that your new exhaust system is correctly positioned on your chassis.

Refer to the diagrams above to determine the correct number of hangers (yellow) required for your application.

RX-8 Exhaust
- Muffler Section - Four (4) hangers are required.
- Connecting Pipe Section - One (1) hanger is required.
- Catalytic Converter Section (also Race Connecting Pipe) - One (1) hanger is required.

MX-5 Miata

- Muffler Section - Two (2) hangers are required in the positions shown on the diagram. Two (2) additional hangers are required as shown by Mazda part number LF46-40-061. Note the position of these hangers!!

- Connecting Pipe Section (also Race Connecting Pipe) - One (1) hanger is required.