RX-7/RX-8 Flywheel - Aluminum

RX-7/RX-8 Flywheel - Aluminum :: 87-95 RX-7 Turbo / RX-8

Racing Beat-designed RX-7 flywheels are both engineered and manufactured by Racing Beat for a wide variety of rotary performance applications. This Racing Beat Aluminum Flywheel can be used on all 1987-95 RX-7 13B turbo engine and all ...

Part Number: 11435Our Price $378.00 Add to Cart

Exedy RX-7/RX-8 Flywheel - Steel

Exedy RX-7/RX-8 Flywheel - Steel :: 87-95 RX-7 Turbo/RX-8

This beautiful Exedy Lightweight Steel Flywheel can be used on all 1987-95 RX-7 13B turbo engines, and all 2004-2011 RX-8 applications.  This RX-7 flywheel is compatible with all  240mm Mazda Factory and most aftermarket clutch discs. Note: The ...

Part Number: 11438Our Price $415.00 Add to Cart

Aluminum Flywheel Mounting Hardware Kit

Aluminum Flywheel Mounting Hardware Kit :: 87-95 RX-8 / RX-8

This kit contains the required hardware to mount a Racing Beat Aluminum Flywheel to any 1987-91 Turbo II, 1993-95 RX-7, or 2004-2011 RX-8 Renesis engine.  The kit also includes the small spacers required for mating the pressure plate to the ...

Part Number: 95193Our Price $19.00 Add to Cart

Rear Counterweight

Rear Counterweight :: 04-11 RX-8

Rear Counterweight - RX-8 2004-09 13B Engines - All automatic transmission-configured Mazda rotary engines are equipped with a rear counterweight as shown. The counterweight serves as both a critical engine balancing component and as an attachment point ...

Part Number: 11458Our Price $162.97 Add to Cart

Stock Flywheel Puller Tool

Stock Flywheel Puller Tool

The Stock Flywheel Puller Tool will remove any stock Mazda flywheel from its taper press fit on the eccentric shaft once the flywheel nut is loosened. This easy-to-use tool is a "must have" for any serious rotary mechanic!

Part Number: 22002Our Price $38.00 Add to Cart

Auto Transmission Balance Weight Puller Tool

Auto Transmission Balance Weight Puller Tool

The Automatic Transmission Balance Weight Puller Tool will remove any automatic transmission balance weight from its taper press fit on the eccentric shaft once the flywheel nut is loosened. This is the same balance weight used with all our lightweight ...

Part Number: 22003Our Price $39.00 Add to Cart

Flywheel Stopper Bar Tool

Flywheel Stopper Bar Tool

The Flywheel Stopper Bar Tool is normally required whenever the flywheel retaining nut is being removed or installed. The Racing Beat Stopper Bar bolts to either the flywheel (except Tilton) or the automatic transmission flex plate and prevents the ...

Part Number: 22001Our Price $27.00 Add to Cart

Flywheel Nut Wrench Tool

Flywheel Nut Wrench Tool

Having the correct tool always makes the job seem easy, right? Although you probably won't be using this tool much, it will certainly pay for itself even if you only use it once! The Flywheel Nut Wrench tool is used to remove or install the 54mm (2....

Part Number: 22000Our Price $41.00 Add to Cart


REN.V2 Race Pipe
04-11 RX-8

Racing Beat REN.V2 RX-8 Race Pipe Resonated Catalytic Converter Replacement Pipe - RX-8 owners have discovered that a ...

Add to Cart more info

Our Price: $373.00

ULTRA Ignition Wires
04-11 RX-8

Racing Beat's ULTRA 8mm Silicone Ignition Wires for the 2004-2011 RX-8 are constructed with zinc-plated, high-...

Add to Cart more info

Our Price: $112.00

Exhaust Header
04-11 RX-8

The Racing Beat RX-8 Header for the Renesis engine is constructed using 100% stainless steel for superior quality, ...

Add to Cart more info

Our Price: $536.00

Go to Racing Beat Home Page
Select: Go to Shopping Cart