Mazda RX-8 Performance Parts : Flywheels

 : Flywheels : Flywheel Nut Wrench Tool

Flywheel Nut Wrench Tool

Part Number: 22000

Price: $41.00

Qty:

Flywheel Nut Wrench Tool -  - Detail 1

Addtional Photos - Select to Enlarge

Facebook Share

Flywheel Nut Wrench Tool

Having the correct tool always makes the job seem easy, right? Although you probably won't be using this tool much, it will certainly pay for itself even if you only use it once! The Flywheel Nut Wrench tool is used to remove or install the 54mm (2.125") flywheel retaining nut. During re-assembly, this tool will allow you to accurately re-torque the nut to the required 350 foot-pounds This tool can be used with the engine in or out of the chassis.

Made in the USAMade in the USA by Racing Beat, Inc.

Customers who bought the above item also often bought:

Flywheel Stopper Bar Tool

Flywheel Stopper Bar Tool

The Flywheel Stopper Bar Tool is normally required whenever the flywheel retaining nut is being removed or installed. The Racing Beat Stopper Bar bolts to either the flywheel (except Tilton) or the automatic transmission flex plate and prevents the... Flywheel Stopper Bar Tool

Stock Flywheel Puller Tool

Stock Flywheel Puller Tool

The Stock Flywheel Puller Tool will remove any stock Mazda flywheel from its taper press fit on the eccentric shaft once the flywheel nut is loosened. This easy-to-use tool is a "must have" for any serious rotary mechanic!

Stock Flywheel Puller Tool

Grinding Stone - Ball Shape

Grinding Stone - Ball Shape

This grinding stone has the following specifications:
Grinding stone, ball shaped, 1/8" shank diameter by 3 1/2" overall length (stone 1/2" diameter). Our experience has shown that an average of four (4) grinding stones are... Grinding Stone - Ball Shape

Replacement Friction Plate - 74-92 Rotary NT/1.8 ltr Miata

Replacement Friction Plate - 74-92 Rotary NT/1.8 ltr Miata

The Racing Beat-manufactured Replacement Friction Plate is intended to replace a worn or damaged 225mm friction plate on all 1974-92 application non-turbo or 1994-2001 Miata 1.8 ltr Racing Beat Aluminum Flywheels only. Simply unbolt the worn or... Replacement Friction Plate - 74-92 Rotary NT/1.8 ltr Miata

Go to Racing Beat Home Page
Select: Go to Shopping Cart