Mazda RX-8 Performance Parts : Engine Porting & Assembly Tools

 : Engine - Porting & Assembly  Tools : Street Porting Template Renesis 13B 6-Port Engine - Intake/Exhuast

Street Porting Template
Renesis 13B 6-Port Engine - Intake/Exhuast *

Part Number: 22203

Price: $100.00

Qty:

Street Porting Template - Renesis 13B 6-Port Engine - Intake/Exhuast - Detail 1Street Porting Template - Renesis 13B 6-Port Engine - Intake/Exhuast - Detail 2Street Porting Template - Renesis 13B 6-Port Engine - Intake/Exhuast - Detail 3

Addtional Photos - Select to Enlarge

Facebook Share

Street Porting Template
Renesis 13B 6-Port Engine - Intake/Exhuast *

The Racing Beat Street -Port Intake & Exhaust Templates allow you to undertake your own intake and exhaust porting efforts on all model years of the high-power 6-Port Renesis 13B engine. These porting templates are traced from Racing Beat's own master templates, which are the result of years of research and development. The actual port shapes are traced on thin sheets of aluminum which you must first cut out, testing your ability to use a die grinder effectively before attempting to port an expensive engine component. The finished template is held in place with tubular dowels and the porting shape is then traced onto each housing.

Included with the Renesis porting templates are Racing Beat's exclusive detailed instructions and advice to guide you through your porting efforts. Limited clearance on the 6-Port Renesis side housings creates additional challenges when porting these housings, our instructions provide detailed photos of the most critical areas of concern.

After porting your Renesis we strongly recommend our computer REN.V3 PCM flash to take advantage of additional power gains provided by your porting efforts.

* Legal in California only for racing vehicles, which may never be used upon a highway.
  What does this mean? Click Frequently Asked Questions About Emission Laws And Regulations.
Made in the USAMade in the USA by Racing Beat, Inc.

Customers who bought the above item also often bought:

Oil Hose Adapter Fitting - 16MM to -10 Hose

Oil Hose Adapter Fitting - 16MM to -10 Hose

We offer the Racing Beat Oil Cooler Hose Adapter Fittings to simplify oil system plumbing. These fittings adapt the 16mm female metric threads in the front cover (1971-95 rotary engines) and oil cooler (1971-85 stock or factory race) to accept -10 hose... Oil Hose Adapter Fitting - 16MM to -10 Hose

Aluminum Alternator Pulley -Double Sheave - 74-92 Rotary Engines (All)

Aluminum Alternator Pulley -Double Sheave - 74-92 Rotary Engines (All)

The Racing Beat-designed Double Sheave Aluminum Alternator Pulley reduces alternator RPM approximately 20% from stock RPM, and is intended for high performance and moderate race use. It is compatible with either the stock main pulley, or assuming you... Aluminum Alternator Pulley -Double Sheave - 74-92 Rotary Engines (All)

Exhaust Manifold Air Injection Cover Plate - 04-11 RX-8

Exhaust Manifold Air Injection Cover Plate - 04-11 RX-8

The Air Injection Cover Plate for the RX-8 is intended to block the opening in the Mazda OEM Factory exhaust manifold, or Racing Beat header, that remains if the emissions air injection tube is not being utilized. This simple cover plate is held in... Exhaust Manifold Air Injection Cover Plate - 04-11 RX-8

Rotor Oil Filler Cap

Rotor Oil Filler Cap

The Racing Beat-designed and manufactured Rotor Oil Filler Cap fits All Mazda 12A and 13B Rotary Engines Except: 1993-95 RX-7, 2004-08 Auto-trans RX-8, 2009 RX-8 ALL) Yes, we know that there are many "rotor shaped" oil caps available on... Rotor Oil Filler Cap

Go to Racing Beat Home Page
Select: Go to Shopping Cart