Mazda RX-8 Performance Parts : Ring & Pinion Differential

 : Ring & Pinion - Differential : Ring and Pinion Gear Set - 4.30 Ratio 93-95 RX-7 / RX-8

Ring and Pinion Gear Set - 4.30 Ratio
93-95 RX-7 / RX-8

Part Number: 13016

Price: $680.00

Qty:

Ring and Pinion Gear Set - 4.30 Ratio - 93-95 RX-7 / RX-8 - Detail 1

Addtional Photos - Select to Enlarge

Facebook Share

Ring and Pinion Gear Set - 4.30 Ratio
93-95 RX-7 / RX-8

The Mazda 4.30 ratio ring and pinion set is suitable use on the following rotary applications: 1993-1995 Twin Turbo RX-7 and RX-8.

RX-8 Factory Gear Ratios
2004-11RX-8 Auto Trans - 4.30
2004-08 RX-8 Man Trans - 4.44
2009-11 RX-8 Man Trans -4.77

Alternate axle ratios are available for special applications. These ratios interchange exactly with the stock parts and should be adjusted to stock specifications (except as noted on the information sheet supplied with the gear set). If you replace your existing gear set with a lower ratio (higher number) gear set you will increase the vehicle's acceleration and move through the transmission gears quicker, but you will simultaneously reduce the top speed of the vehicle for a given rpm limit. However, if you reduce your existing gear set with a higher ratio (lower number) gear set you will decrease the vehicle's acceleration and move slower through the gears, but the top speed of the vehicle will increase for the same given rpm limit as in the previous example.

 

THIS PART CANNOT BE RETURNED FOR EXCHANGE OR REFUND DUE TO ITS FRAGILE NATURE AND POSSIBLE CUSTOMER MISHANDLING 

Genuine Mazda PartGenuine Mazda Part.
Prop65Warning

Customers who bought the above item also often bought:

Pinion Lock Nut - 71-95 RX-7 ALL / RX-8

Pinion Lock Nut - 71-95 RX-7 ALL / RX-8

Pinion Lock Nut 1971-85 ALL & 1986-92 Non Turbo - When replacing the pinion in any differential, it is wise to replace the pinion bearings, locknut, and seal, and it is mandatory to change the crush tube. The parts we offer are Mazda OEM Factory... Pinion Lock Nut - 71-95 RX-7 ALL / RX-8

Differential Front Seal  - 93-95 RX-7

Differential Front Seal - 93-95 RX-7

Differential Front Seal - When replacing the pinion in any differential, it is wise to replace the pinion bearings, locknut and seal, and mandatory to change the crush tube. The parts we offer are Mazda factory parts. Differential Front Seal  - 93-95 RX-7

Differential Side Bearing - 87-95 RX-7 Turbo / RX-8

Differential Side Bearing - 87-95 RX-7 Turbo / RX-8

Differential Side Bearing (2 required) - Changing from the standard differential to the limited slip differential is a fairly easy job. This modification requires only a few special tools (consult the factory shop manual) and two (2) new bearings.... Differential Side Bearing - 87-95 RX-7 Turbo / RX-8

Pinion Crush Tube - 93-95 RX-7 / RX-8

Pinion Crush Tube - 93-95 RX-7 / RX-8

Crush Tube - When replacing the pinion in any differential, it is wise to replace the pinion bearings, locknut and seal, and mandatory to change the crush tube. The parts we offer are Mazda factory parts. Pinion Crush Tube - 93-95 RX-7 / RX-8

Go to Racing Beat Home Page
Select: Go to Shopping Cart