1990-2005 Mazda Miata Performance Parts : Suspension Sway Bars

 : Suspension - Sway Bars : Sway Bar End Links 99-05 (Front)

Sway Bar End Links
99-05 (Front)

Part Number: 54201

Price: $89.74

Qty:

Sway Bar End Links - 99-05 (Front) - Detail 1Sway Bar End Links - 99-05 (Front) - Detail 2Sway Bar End Links - 99-05 (Front) - Detail 3

Addtional Photos - Select to Enlarge

Sway Bar End Links
99-05 (Front)

Applications: 1999-2005 Miata Front - Our popular Racing Beat-designed endlinks are a direct swap with the Miata factory links for all 1999-2005 Miatas (front) and provide the performance enthusiast the ability to set either front or rear sway bars to a "neutral position" while the chassis is at ride height to avoid pre-loading of the bar. The experienced enthusiast may wish to purposely "pre-load" the bar to create a specific handling characteristic to induce either a mild understeer or oversteer condition.

Although the stock end links were well suited for use with the original Miata sway bar, installation of a stronger, stiffer aftermarket Miata sway bar may accelerate the end link wear. This is particularly true if you're still using the tired, old factory installed units.

Adjustability range: 107mm (4.2") - 97mm (3.8") approx.

The Racing Beat sway bar end links feature CNC-machined aluminum end housings and are fitted with urethane bushings to further reduce flexing - as compared to softer stock rubber bushing links. The end link mounting sleeve is fabricated from 4130 chrome moly steel tubing, then heat-treated during the manufacturing process  to ensure superior strength and longevity. We prefer the use of our design as compared to the commonly used Heim-joint design due to the slightly more forgiving nature of the urethane components used. The urethane bushing material absorbs road vibration and harshness as compared with more rigid and unforgiving Heim-joint ball style ends. If you use your car as a daily-driven vehicle, in the long run we believe you'll appreciate the Racing Beat end links.

Each set contains two (2) complete end links to serve one (1) sway bar. These end links have been designed for use on the Mazda stock bar, all Racing Beat sway bars, and comparable aftermarket bars.

Note: The Racing Beat end links for the 1999-2005 Miata front sway bar feature a slightly shorter stud as compared to the earlier 1990-1997 Miata Racing Beat front end links.

Made in the USAMade in the USA by Racing Beat, Inc.
Prop65Warning

Customers who bought the above item also often bought:

Sway Bar End Links - 99-05 Miata (Rear)

Sway Bar End Links - 99-05 Miata (Rear)

Application: 1999-05 Miata Rear - Our popular Racing Beat-designed Miata endlinks are a direct swap with the Miata factory links for all 1990-1997 Miatas (front and rear) and provide the performance enthusiast the ability to set either front or rear Miata... »more
Price: $89.74 ADD »

Sway Bar - Tubular - Front - 99-00 Miata

Sway Bar - Tubular - Front - 99-00 Miata

Racing Beat-designed front tubular sway bar for the 1999-2000 Miata reduce chassis roll in turns and increase your car's sensitivity to steering inputs, thereby improving maximum cornering power. Substantial engineering effort, select steel alloys,... »more
Price: $229.22 ADD »

Sway Bar - Tubular - Front - 01-05 Miata

Sway Bar - Tubular - Front - 01-05 Miata

Racing Beat-designed front tubular sway bar for the 2001-2005 Miata reduce chassis roll in turns and increase your car's sensitivity to steering inputs, thereby improving maximum cornering power. Substantial engineering effort, select steel alloys,... »more
Price: $263.55 ADD »

Lower Control Arm Reinforcement Flanges  - 99-05

Lower Control Arm Reinforcement Flanges - 99-05

The 1990-97 Miata was designed by Mazda with "U" shaped end link attachment brackets on the front lower control arms. This "double-sheave" attachment provided a secure and rigid mounting technique for the sway bar end links. When... »more
Price: $33.96 ADD »

Go to Racing Beat Home Page
Select: Go to Shopping Cart