2006-2024 Mazda MX-5 Performance Parts : Suspension Sway Bars

 : Suspension - Sway Bars : Sway Bar - Tubular Front 16-24 MX-5 ND

Sway Bar - Tubular Front
16-24 MX-5 ND

Part Number: 54125

Price: $248.62


Sway Bar - Tubular Front - 16-24 MX-5 ND - Detail 1

Addtional Photos - Select to Enlarge

Sway Bar - Tubular Front
16-24 MX-5 ND

Racing Beat Sway Bars - Production

ND Front Bar Quick Run Installation

MX-5 ND Front Sway Bar - Tubular

Racing Beat's sway bars for the MX-5 ND offers you the ability to further tune your suspension to match additional suspension upgrades or to suit your particular driving style. It's well noted that Mazda designed the MX-5 ND with a noticable amount of body roll in an effort to enchance driver feel, but this amount of roll isn't best suited for high performance driving. Take back control of your MX-5 by upgrading both front and rear sway bars and flatten the car during cornering, improve tranisition speed, and increase cornering power.

The addition of a set of matched-set front and rear sway bars is an ideal way to dramatically improve the handling of your Miata without sacrificing ride overall ride quality. If you use your Miata primarily as a daily driven car with occasional trips to the track or your favorite mountain road, the Racing Beat bar combination is well-suited for your needs.

Racing Beat has refined 45 years of racing experience and undisputed successes into the design of our Miata suspension components. From a MotorTrend Magazine (RB 1990 Miata, June, 1993) all-time slalom record (73.6 MPH) to a Sport Compact Car (RB 1999 Miata ) skidpad record (1.1g), Racing Beat suspension components have proven themselves where it counts, on the track.

Designed and manufactured in-house by Racing Beat, our history with Mazda aftermarket sway bar applications extends over four decades! The Racing Beat 1.125" OD tubular sway bar (.188" wall) is designed to improve the handling characteristics of your MX-5 for use on the street and track. By design, the Racing Beat MX-5 ND tubular bar is 3.39 times stiffer than the stock 23mm (.896") bar. Offered with three (3) end link mounting hole positions, the Racing Beat MX-5 ND sway bar can be further fine-tuned as required to alter the handling characteristics of the MX-5. 

All Racing Beat sway bars are finished wih our distinctive red powder coating paint, which provides a smooth, glossy protective layer. Each bar comes supplied with replacement urethane bushings and clamps, lateral stopper bushings, a pack of specially designed bushing lubricant, and installation instructions. Actual MX-5 ND front bar shown in photo.

Combine this sway bar with the Racing Beat HD Sway Bar End Links to fully exploit the potential of your car's performance.

When adding high performance suspension components to any vehicle, the result is an increased demand on the vehicle's stock components. We have designed these high performance sway bar components to complement and further enhance your vehicle's performance. We strongly recommend you consider your specific driving requirements when upgrading your vehicle's suspension and select components accordingly.

Made in the USAMade in the USA by Racing Beat, Inc.

Racing Beat Recommended Accessories:

Sway Bar - Tubular Rear - 16-24 MX-5 ND

Sway Bar - Tubular Rear - 16-24 MX-5 ND

MX-5 ND Rear Sway Bar - Tubular Racing Beat's tubular rear sway bar for the MX-5 ND has been designed as a matched-component for use with our ND front bar. Designed and manufactured by Racing Beat, the stiffness of this bar is 3.7 times greater... »more
Price: $191.61 ADD »

Adjustable Sway Bar End Links - Front - 2016-18 MX-5 ND

Adjustable Sway Bar End Links - Front - 2016-18 MX-5 ND

Racing Beat Sway Bar End Link Set - MX-5 ND FRONT sway bar applications. For decades our Racing Beat End Link sets have set the standard for use on select Mazda applications. While early Miata and RX-7 applications allowed us to use a simple... »more
Price: $121.28 ADD »

Go to Racing Beat Home Page
Select: Go to Shopping Cart