Early Rotary & 1979-85 Mazda RX-7 : Exhaust Components

 : Exhaust - Components : Connecting Pipe Section 79-80 RX-7

Connecting Pipe Section
79-80 RX-7 *

Part Number: 16202

Price: $175.00

Qty:

Connecting Pipe Section - 79-80 RX-7  - Detail 1Connecting Pipe Section - 79-80 RX-7  - Detail 2

Addtional Photos - Select to Enlarge

Include These Recommended Parts With My Order:

Replacement Hanger D - Presilencer/Cat Converter
Rubber Hanger (#16332)
Price: $29.00 ea. x 2

Connecting Pipe Section
79-80 RX-7 *

Connecting Pipe Section
1979-80 RX-7

We offer a replacement connecting pipe section for the exhaust section located between the thermal reactor and muffler unit. The Racing Beat connecting pipe is produced using mandrel-bent 1.75" OD thick-wall stainless steel tubing and utilizes laser-cut stainless-steel flanges. Although the stock rubber hanger can be reused, we strongly suggest replacing an old, worn rubber hanger to ensure correct chassis alignment of the exhaust system.

Installation Notes:

The original stock donut style gasket can be reused (discontinued by Mazda). As an alternative, Racing Beat gasket PN 16315 can be used with the Racing Beat 1979-80 RX-7 muffler (PN 16430), or a muffler with an aftermarket muffler with a FLAT flange surface. (The flange on the stock 1979-80 muffler is NOT flat and the attempted use of flat gasket will result in an exhaust gas leak between these flange surfaces.) 

This connecting pipe is NOT supplied with mounting positions for the stock heat shield. The heat shield cannot retained on this application.

- This connecting pipe is NOT supplied with a mounting position for the thermal reactor exhaust tube.Use of this connecting pipe with the thermal reactor exhaust components will require modifications undertaken by the installer.

 

* Legal in California only for racing vehicles, which may never be used upon a highway.
  What does this mean? Click Frequently Asked Questions About Emission Laws And Regulations.
Assembled in the USA by Racing Beat, Inc.Assembled in the USA by Racing Beat, Inc.
Prop65Warning

Customers who bought the above item also often bought:

Mini Presilencer - 79-80 RX-7

Mini Presilencer - 79-80 RX-7

Racing Beat Mini Power Pulse Presilencer This short version of our rotary presilencer was orignally designed for use our header on the 1979-80 RX-7, but has since become valuable for rotary owners looking for solutions to a challenging exhaust design... »more
Price: $248.62 ADD »

Rotary Exhaust Header - 79-80 RX-7 12A

Rotary Exhaust Header - 79-80 RX-7 12A

Racing Beat Header 1979-80 RX-7 12A The Racing Beat RX-7 Header with Heat Exchanger Outlet Flange is intended for use on the 1979-1980 RX-7. This header will replace the thermal reactor unit and bolt-up directly to the inlet of the stock... »more
Price: $389.30 ADD »

Engine-to-Header Gasket - 76-85 12A Engine

Engine-to-Header Gasket - 76-85 12A Engine

Engine-to-Header Gasket - 1976-85 12A Engine - This gasket is required when mounting an exhaust header or exhaust manifold to a 1976-85 (12A) rotary engine. »more
Price: $49.59 ADD »

Exhaust Hanger - Dount Style - 79-85 RX-7 Connecting Pipe

Exhaust Hanger - Dount Style - 79-85 RX-7 Connecting Pipe

1979-85 RX-7 Exhaust System Replacement Rubber Hangers (Sold and priced as individual units.) - Tired, old rubber hangers may be the source of potential trouble for the exhaust system on your RX-7! We have found that with age the rubber hangers that... »more
Price: $15.05 ADD »

Go to Racing Beat Home Page
Select: Go to Shopping Cart