Early Rotary & 1979-85 Mazda RX-7 : Exhaust Components

Street Port Center Section
79-85 RX-7 *

Part Number: 16398

Price: $576.35

See below for special ordering options
and instructions.

Street Port Center Section - 79-85 RX-7 - Detail 1

Street Port Center Section - 79-85 RX-7 - Detail 2

Addtional Photos - Select to Enlarge

Street Port Center Section
79-85 RX-7 *

This Street Port Exhaust System Center Section for the 1979-85 RX-7 12A & 13B (except 1984-85 RX-7 GSL-SE 6-Port) is the same component that comes equipped with our 1979-85 RX-7 12A and 1979-85 RX-7 13B Complete Street Port Exhaust Systems.

This center section is designed to bolt-up to the year-specific Racing Beat Road Race Header and is compatible for use on the 1979-85 RX-7 12A & 13B (except GSL-SE 6-Port) models. This center section can be used as a replacement component in the Racing Beat system, or for use in your own custom exhaust system for your RX-7.

This center section features two 2" OD tubes that each feed into a pair of 20" long Power Pulse Presilencers to moderate the rotary engine exhaust noise. Gaskets are available if needed, refer to gasket for more information. Manufactured entirely in-house by Racing Beat.

* Legal in California only for racing vehicles, which may never be used upon a highway.
What does this mean? Click Frequently Asked Questions About Emission Laws And Regulations.

Made in the USA by Racing Beat, LLC.

Customers who bought the above item also often bought:

Road Race Header Outlet Gasket

flange-gasket-guide.pdf Racing Beat's Road Race Header - Outlet Gasket This gasket is intended for use with the outlet flange of the Racing Beat Road Race header (one required). This gasket is also used on ALL Racing Beat Road Race...
" rel="nofollow">

Muffler Gasket - Dual Inlet Tube - 81-82 RX-7

flange-gasket-guide.pdf This exhaust gasket can be used on the dual inlet muffler for the 1981-85 RX-7.
" rel="nofollow">

Power Pulse RX-7 Muffler - 81-82 RX-7

1981-82 RX-7 Power Pulse Main Muffler Racing Beat has been manufacturing replacement mufflers for rotary-powered vehicles for over 45 years! Ordinary replacement mufflers don't stand a chance against the extreme temperatures and pounding exhaust gas...
" rel="nofollow">

Engine-to-Header Gasket - 76-85 12A Engine

flange-gasket-guide.pdf Engine-to-Header Gasket - 1976-85 12A Engine - This gasket is required when mounting an exhaust header or exhaust manifold to a 1976-85 (12A) rotary engine.
" rel="nofollow">