
Early Rotary & 1979-85 Mazda RX-7 : Exhaust Flanges
Racing Beat offers a wide selection of exhaust flanges for use in the construction or repair of a custom exhaust system. These flanges are the exact same flanges used by Racing Beat in the construction of our exhaust components and are compatible for use when mating with other Racing Beat or stock components as specified. Review our Flange and Gasket Reference Guide to assist with the correct selection of flanges for your project.
Engine-to-Header Flange :: 74-85 12AThis 1/2" thick laser-cut engine-to-header exhuast flange can be used to fabricate a custom exhaust system for any 1974-85 12A rotary engine. This is the same flange that is used on Racing Beat's 12A engine- headers. Replacement gasket for use ... |
Engine-to-Header Flange - Steel :: 13BThis 1/2" thick laser-cut engine-to-header exhaust flange can be used to fabricate a custom exhaust system for any 13B rotary engine. This is the same exhaust flange that is used on Racing Beat's 13B engine rotary headers. If needed, we offer a ... |
Engine-to-Header Flange - Stainless :: 13B EnginesEngine-to-Header Flange (304-Stainless Steel) - This 13B rotary engine-to-header flange can be used to fabricate a custom exhaust system for any 13B rotary engine. This beautifully detailed cast-stainless steel flange is .50" thick and offers an ... |
Engine-to-Header Flange :: 3-rotor - 20B EngineThis laser-cut mild steel engine-to-header exhaust flange can be used to fabricate a custom exhaust system for a 20B 3-rotor engine. If needed, we offer a replacement gasket for use with this flange. (Two required - use cut the second gasket to fit.) |
Road Race Header :: Outlet Flange - SteelThis laser-cut flange can be used to fabricate a custom exhaust for use with the Racing Beat Road/Race Header. This two-hole flange measures 6" X 2-13/16" and features two 2" openings. This is the same flange that comes included on Racing ... |
Road Race Header :: Outlet Flange - Stainless SteelThis cast stainless steel flange can be used to fabricate a custom exhaust for use with the Racing Beat Road Race Header. This two-hole flange measures 6" X 2-13/16" and features two openings for use with 2" OD tubing. If needed, we offer a... |
Heat Exchanger Outlet Flange - Front :: 76-80This laser-cut flange is the same component that is used on the front of our Racing Beat Mini Presilencer for 1979-80 RX-7 applications. This flange will bolt up to the stock heat exchanger on 1976-80 applications. If needed, we offer a replacement gasket... |
Mini Presilencer Flange - Front :: 79-80 RX-7This laser-cut flange is the same component that is used on the front of our Racing Beat Mini Presilencer for 1979-80 RX-7 applications. This flange can be used to fabricate a custom exhaust for use with the 1979-80 Streetable Header/Collector with Heat ... |
Mini Presilencer Flange :: 79-80 RearThis laser-cut flange is the same flange that is used on the rear of Racing Beat Mini Presilencer for 1979-80 RX-7 applications. This flange can be used to fabricate a custom exhaust system rearward from the output of the "Mini" presilencer. If ... |
Presilencer Flange :: 81-83 RX-7This laser-cut flange is the same flange that is used on the front and rear of our Racing Beat Presilencer for 1981-83 RX-7 applications (12 mm studs). This flange can be used to fabricate a custom exhaust system rearward from the output of the Racing ... |
Presilencer Flange :: 84-85 RX-7This exhaust flange is the same flange that is used on the front and rear of our Racing Beat Presilencer for 1984-85 RX-7 applications (10 mm studs). This flange can be used to fabricate a custom exhaust system rearward from the output of the Racing Beat ... |
Back Pressure Pickup Tube FlangeThis Back Pressure Pickup Tube (also referred to as a 6-Port Intake Sensing Tube) Flange can be used in the fabrication of a sensing tube for use with a 13B 6-Port engine application. If needed, we offer a replacement gasket for use with this flange. |
Muffler Flange :: 71-80This laser-cut muffler flange can be used in the fabrication of a custom exhaust system for use on 1971-80 applications. Designed to mate with the 1979-80 RX-7 factory connecting pipe, this flange is designed with a recessed area to accommodate the ... |
Muffler Flange :: 81-82 RX-7This laser-cut muffler flange can be used in the fabrication of a custom exhaust system for use on 1981-82 RX-7applications. If needed, we offer a replacement gasket for use with this flange. |
Muffler Flange :: 83-85 RX-7This laser-cut muffler flange can be used in the fabrication of a custom exhaust system for use on 1983-85 RX-7 applications. If needed, we offer a replacement gasket for use with this flange. Specifications: 51.8mm ID (2.04") 13mm ID Bolt Holes - ... |
Multi-Purpose Exhaust Flange :: Steel 2-inch IDSimplify the fabrication of your exhaust system and use only one style of exhaust flange! This multi-use exhaust flange is laser cut from A-36 mild steel and can be used in the design and fabrication of any street or racing exhaust. If needed, we offer a ... |
Exhaust Flange - Stainless Steel :: 2.5-inch IDStainless Steel Exhaust Flange - 2.5" ID We offer this cast-stainless steel 2.5" ID flange for use in many custom applications. This flange measures 12mm thick (.5"), has 13.5mm" diameter mounting holes spaced 100mm (approx 3.93"... |
Exhaust Flange - Stainless Steel :: 3-inch IDWe offer this cast-stainless steel 3" ID flange for use in many custom applications. This flange measures 7/16" thick, has 7/16" diameter mounting holes spaced 110mm (approx 4-5/16") apart (from center-to-center). Uses 3" ID ... |