Early Rotary & 1979-85 Mazda RX-7 : Intake Manifolds & Cover Plates

 : Intake - Manifolds &  Cover Plates : Holley Intake Manifold 74-78 12A - All

Holley Intake Manifold
74-78 12A - All *

Part Number: 16463

Price: $406.28

Qty:

Holley Intake Manifold - 74-78 12A - All - Detail 1Holley Intake Manifold - 74-78 12A - All - Detail 2

Addtional Photos - Select to Enlarge

Include These Recommended Parts With My Order:

Intake Gasket - Engine-to-Manifold - 76-80 12A
Gasket 76-80 (#16731)
Price: $14.00
Intake Gasket - Engine-to-Manifold - 74-5/ 81-85 12A
Gasket 74-75 (#16730)
Price: $9.39

Holley Intake Manifold
74-78 12A - All *

Racing Beat Holley Manifold
1974-78 12A Rotary Engine


The Racing Beat-designed intake manifold for the 1974-78 12A Stock and Street-ported engine is ideally suited to meet the performance requirements of the Holley carburetor. Designed by Chief Engineer/Engine Builder Jim Mederer, these cast aluminum intake manifolds have proven themselves in a variety of street and race applications.

All of Racing Beat's manifolds for Holley carburetor applications are sand-cast by a local foundries and delivered to our in-house production shop for all machining and surface finishing processes. Every manifold is then hand-ported to match a specific intake port configuration for an intended engine application. Further machining is then undertaken to match the base-plate surface to the Holley carburetor base. These critical machining steps ensure a positive fitment between both the engine surface and the carburetor base. Every manifold is then surface finished using a ball-burnishing process that enhances the final appearance of the aluminum material. Once these labor-intensive processes have been completed these manifolds look as good as they perform!

If needed, an engine-to-manifold gasket (1974-75 & 1981-85 12A) or (1976-80 12A), and/or Holley base gasket are available separately.

Installation Note:
Requires four (4) 5/16"-18 x 1.5"L fully threaded hex bolts and washers to mount a carburetor to the top plate.We suggest you thread the bolts from the underside of the top mounting flange forming mounting "studs" for the carburetor. Place the carburetor over the studs and secure with split washers and 5/16" hex nuts. 

* Legal in California only for racing vehicles, which may never be used upon a highway.
  What does this mean? Click Frequently Asked Questions About Emission Laws And Regulations.
Made in the USAMade in the USA by Racing Beat, Inc.
Prop65Warning

Customers who bought the above item also often bought:

Throttle Cable Bracket - Holley (4-Port Engine)

Throttle Cable Bracket - Holley (4-Port Engine)

Throttle Cable Bracket for Holley Carburetors (Except 6-port Applications) - This throttle cable bracket is incorporated into our Complete Holley Intake Kits that we offer, but can be purchased separately. This bracket is intended for Holley... »more
Price: $35.18 ADD »

Intake Gasket - Engine-to-Manifold - 76-80 12A

Intake Gasket - Engine-to-Manifold - 76-80 12A

The 1976-80 12A Engine-to-Manifold Mazda Factory gasket is intended to fit securely between the intake manifold and the engine. (Photo shown is of actual gasket) If you are installing a Racing Beat Holley or Dellorto intake manifold, two (2) Water... »more
Price: $14.00 ADD »

Holley Carburetor Base Gasket

Holley Carburetor Base Gasket

Holley Carburetor Base Gasket  This is the Racing Beat-recommended gasket for use with all Racing Beat Holley intake manifolds. As compared with the single, large opening gasket that Holley supplies with their carburetors, this version features... »more
Price: $12.60 ADD »

Intake Gasket - Engine-to-Manifold - 74-5/ 81-85 12A

Intake Gasket - Engine-to-Manifold - 74-5/ 81-85 12A

The 1974-75 and 1981-85 12A Engine-to-Manifold Mazda Factory gasket is intended to fit securely between the intake manifold and the engine. (Photo shown is of actual gasket) If you are installing a Racing Beat Holley or Dellorto intake manifold,... »more
Price: $9.39 ADD »

Go to Racing Beat Home Page
Select: Go to Shopping Cart