Price: $210.10

The Exedy Street/Strip Pressure Plate and now Race (Exedy superseded), intended for the 1983-92 RX-7 12A & 13B (6-Port Non-Turbo) chassis, is designed for high-performance street applications and for occasional drag or road racing. A stronger diaphragm spring applies substantially more holding force (700 kg - 1574 lbs clamping load) to the clutch disc to avoid clutch slip under load. This RX-7 pressure plate interchanges exactly with the stock pressure plate, and can be used with the 225mm OD stock disc or any equivalent replacement aftermarket disc.

We strongly recommend replacing the throw-out bearing during any clutch work to ensure trouble free performance. Also, we recommend replacing the transmission front and rear seal kit when re-installing the transmission to reduce the possibility of leakage.

Safety Note: None of the Racing Beat, Exedy, Mazda OE, or any aftermarket flywheel or clutch replacement components should ever be allowed to exceed 10,500 RPM under any condition. You must use an engine RPM-limiter to prevent excessive RPM. If your engine is capable of exceeding 8,500 RPM you must install a transmission scatter shield or ballistic blanket. Failure to implement the above may result in serious injury or even death.