1986-92 Mazda RX-7 Performance Parts : Exhaust Flanges
Racing Beat offers a wide selection of exhaust flanges for use in the construction or repair of a custom exhaust system. These flanges are the exact same flanges used by Racing Beat in the construction of our exhaust components and are compatible for use when mating with other Racing Beat or stock components as specified. Review our Flange and Gasket Reference Guide to assist with the correct selection of flanges for your project.
 |
Engine-to-Header Flange - Steel :: 13BThis 1/2" thick laser-cut engine-to-header exhaust flange can be used to fabricate a custom exhaust system for any 13B rotary engine. This is the same exhaust flange that is used on Racing Beat's 13B engine rotary headers. If needed, we offer a ... »more Part Number: 16183 |
 |
Engine-to-Header Flange - Stainless :: 13B EnginesEngine-to-Header Flange (304-Stainless Steel) - This 13B rotary engine-to-header flange can be used to fabricate a custom exhaust system for any 13B rotary engine. This beautifully detailed cast-stainless steel flange is .50" thick and offers an ... »more Part Number: 16187 |
 |
Engine-to-Header Flange :: 3-rotor - 20B EngineThis laser-cut mild steel engine-to-header exhaust flange can be used to fabricate a custom exhaust system for a 20B 3-rotor engine. If needed, we offer a replacement gasket for use with this flange. (Two required - use cut the second gasket to fit.) »more Part Number: 16184 |
 |
Road Race Header :: Outlet Flange - SteelThis laser-cut flange can be used to fabricate a custom exhaust for use with the Racing Beat Road/Race Header. This two-hole flange measures 6" X 2-13/16" and features two 2" openings. This is the same flange that comes included on Racing ... »more Part Number: 16197 |
 |
Road Race Header :: Outlet Flange - Stainless SteelThis cast stainless steel flange can be used to fabricate a custom exhaust for use with the Racing Beat Road Race Header. This two-hole flange measures 6" X 2-13/16" and features two openings for use with 2" OD tubing. If needed, we offer a... »more Part Number: 16198 |
 |
Turbo Outlet Flange - Stainless Steel :: 86-91 RX-7This Racing Beat turbo outlet flange can be used to fabricate a custom down pipe or exhaust system on a 1986-91 Turbo RX-7. This laser-cut 304 stainlees steel flange features a 2.5-inch opening and is design to mate to the turbo outlet on the Turbo ... »more Part Number: 16170 |
 |
Turbo Outlet Flange - Steel :: 86-91 RX-7This turbo outlet flange can be used to fabricate a custom down pipe or exhaust system on a 1986-91 Turbo RX-7. This mild-steel laser-cut flange features a 2.5-inch opening and is design to mate to the turbo outlet on the Turbo II stock unit. If needed, ... »more Part Number: 16180 |
 |
Presilencer Flange :: 86-92 RX-7This 2.5" ID exhaust flange is the same flange that is used on the front and rear of our Racing Beat Presilencer for 1986-92 RX-7 applications. This flange can be used to fabricate a custom exhaust system rearward from the output of the Racing Beat ... »more Part Number: 16177 |
 |
Back Pressure Pickup Tube FlangeThis Back Pressure Pickup Tube (also referred to as a 6-Port Intake Sensing Tube) Flange can be used in the fabrication of a sensing tube for use with a 13B 6-Port engine application. If needed, we offer a replacement gasket for use with this flange. »more Part Number: 16324 |
 |
Multi-Purpose Exhaust Flange :: Steel 2-inch IDSimplify the fabrication of your exhaust system and use only one style of exhaust flange! This multi-use exhaust flange is laser cut from A-36 mild steel and can be used in the design and fabrication of any street or racing exhaust. If needed, we offer a ... »more Part Number: 16195.3 |
 |
Exhaust Flange - Stainless Steel :: 2.5-inch IDStainless Steel Exhaust Flange - 2.5" ID We offer this cast-stainless steel 2.5" ID flange for use in your custom exhaust application. This flange measures 12mm thick (.5"), has 13.5mm" diameter mounting holes spaced 100mm (approx... »more Part Number: 16173 |
 |
Exhaust Flange - Stainless Steel :: 3-inch IDWe offer this cast-stainless steel 3" ID flange for use in many custom applications. This flange measures 7/16" thick, has 7/16" diameter mounting holes spaced 110mm (approx 4-5/16") apart (from center-to-center). Uses 3" ID ... »more Part Number: 16185 |
Suspension Package
86-92 RX-7
Improve the handling of your 1986-92 RX-7 with a Racing Beat Suspension Package. Take advantage of our special pricing ...
Our Price: $772.31
RX-7 Flywheel - Lightweight Steel
83-92 RX-7 Non-Turbo
Racing Beat-designed RX-7 flywheels are both engineered and manufactured by Racing Beat for a wide ...
Our Price: $450.00
Rear Suspension Camber Adjuster
86-92 RX-7
The Rear Suspension Camber Adjuster for the 1986-1992 RX-7 is an adjustable link that replaces the stock, fixed-length ...
Our Price: $191.61
