1986-92 Mazda RX-7 Performance Parts : Flywheels

 : Flywheels : RX-7 Flywheel - Lightweight Steel 83-92 RX-7 Non-Turbo

RX-7 Flywheel - Lightweight Steel
83-92 RX-7 Non-Turbo

Part Number: 11437

Price: $382.31


RX-7 Flywheel - Lightweight Steel - 83-92 RX-7 Non-Turbo - Detail 1

Addtional Photos - Select to Enlarge

Facebook Share

RX-7 Flywheel - Lightweight Steel
83-92 RX-7 Non-Turbo

Racing Beat-designed RX-7 flywheels are both engineered and manufactured by Racing Beat for a wide variety of rotary performance applications. This Racing Beat Lightweight Steel Flywheel can be used on all 1983-85 RX-7 12A engines and all 1983-92 RX-7 13B non-turbo engines.  As designed by Racing Beat, thisRX-7 flywheel is compatible with all 1983-92 non-turbo 225mm Mazda Factory and Racing Beat clutch discs.

Note: As of 2/2012 the Racing Beat Lightweight Steel and Aluminum Flywheel kits include the hardware kits; however, the required rear counterweights are available separately - see below.

Designed to retain enough mass for comfortable standing starts this Racing Beat flywheel is ideal for street use, yet it is sufficiently lighter to afford a noticeable improvement in low speed acceleration and to make shifting much smoother. For street use our lightweight steel flywheel not only allows the engine to accelerate more rapidly, but it also eliminates much of the rubbery feel that occurs at clutch engagement while shifting.  

Precision Machining
Precision CNC-machined from high strength steel, our flywheel assembly is mated to the Mazda OEM ring gear, then surfaced hardened using a ferritic carburizing heat-treating process, creating an extremely durable disc wear surface. The ring gear is thermally-mated to the flywheel and bolted in place for added security to prevent slippage during engagement of the starter motor.

Weight Comparison
The weight of the stock flywheel is 23 lbs., compared to 17 lbs for the Racing Beat Lightweight Steel Flywheel including counter weight. The actual reduction in inertia from stock is much greater than the weights suggest, since the stock flywheel is 1 to 2 inches thick at its outside edge.

Retaining Critical Engine Balance
The installation of an aftermarket flywheel requires the use of a Mazda rear counterweight unit to ensure critical balance of the internal rotating assembly (engine rotors). As produced by Mazda, the original stock rotary flywheel features a pronounced balancing mass included in the flywheel casting. This balancing mass, combined with the stock front counterweight unit, provides the correct balance required for the optimal rotational operation of the engine rotors.

To allow an aftermarket flywheel to be used on several different rotary engine applications, this balancing mass is eliminated from the design of the rotary flywheel. However, this critical balancing mass must be replaced with an alternative balance weight or risk severe engine damage due to an "unbalanced" engine. A convenient alternative is to install an appropriate rear counterweight from an automatic transmission-equipped RX-7. Racing Beat offers this counterweight separately if needed.

Rear Counterweight (Required)
All Racing Beat flywheels require the use of an automatic transmission rear counterweight for correct operation. This required Mazda rear counterweight can be ordered separately as needed, see the chart below.

Flywheel Counterweight Chart
(Select your engine model year)

1974-82 12A  (Mazda # 1883-11-751A - very limited availablity)
1974-85 13B  (Mazda # 1029-11-751A - very limited availablity)
1983-85 12A (Mazda # N226-11-751A - Discontinued by Mazda
1986-88 13B All  (Mazda # N3Y8-11-52X)
1989-95 13B All  (Mazda # N3Y2-11-52X)
2004-11 13B RX-8  (Mazda # N3Z2-11-52X)

Installation Hardware
Racing Beat Flywheel kits include the flywheel unit and the appropriate mounting hardware, which includes the appropriate tensile-strength hardware to attach the pressure plate to the flywheel.  DO NOT use other aftermarket flywheel mounting kits with the Racing Beat flywheels.

We strongly recommend replacing the throwout bearing during any clutch work to ensure trouble free performance. Also, we recommend replacing the transmission front and rear seal kit when re-installing the transmission to reduce the possibility of leakage.

Safety Warning
None of the flywheel or clutch components shown in this site should ever be allowed to exceed 10,500 RPM under any condition. This same RPM limit applies to stock components. You must use an engine RPM-limiter to prevent excessive RPM. If your engine is capable of exceeding 8,500 RPM you must install a transmission scatter shield, or ballistic blanket. Failure to implement the above may result in serious injury or even death.

Made in the USAMade in the USA by Racing Beat, Inc.

Customers who bought the above item also often bought:

Rear Counterweight - 86-88 ALL

Rear Counterweight - 86-88 ALL

Rear Counterweight - 1986-88 ALL Engines - All automatic transmission-configured Mazda rotary engines are equipped with a rear counterweight as shown. The counterweight serves as both a critical engine balancing component and as an attachment point for... Rear Counterweight - 86-88 ALL

Exedy Clutch Kit - Stage 1 - 83-92 12A & 13B RX-7 Non-Turbo

Exedy Clutch Kit - Stage 1 - 83-92 12A & 13B RX-7 Non-Turbo

The EXEDY Complete RX-7 Clutch Kit Stage 1 for the 1983-92 RX-7 12A & 13B RX-7 non-turbo (EXEDY 10806) is recommended for Street or Autocross - excellent for daily-driven cars, track-days, or autocross use. Racing Beat Best Seller! Exedy/Daikin... Exedy Clutch Kit - Stage 1 - 83-92 12A & 13B RX-7 Non-Turbo

Transmission Seal Kit - 79-88 RX-7 Non-Turbo

Transmission Seal Kit - 79-88 RX-7 Non-Turbo

1979-88 RX-7 12A & 13B (Non-turbo) Transmission Seal Kit We recommend replacing the RX-7 transmission front seal and rear seals when re-installing the RX-7 transmission to reduce the risk of leakage. Although old age is a primary source of a failing... Transmission Seal Kit - 79-88 RX-7 Non-Turbo

Goodridge Stainless Steel Clutch Line - 86-92 RX-7

Goodridge Stainless Steel Clutch Line - 86-92 RX-7

Goodridge Stainless Steel Clutch Line - 1986-92 Mazda RX-7 (ALL) Replace the old, tired rubber clutch line on your 1986-92 RX-7 with an upgraded braided stainless steel line. This Mazda RX-7 clutch line be used for both street and race applications.... Goodridge Stainless Steel Clutch Line - 86-92 RX-7

Go to Racing Beat Home Page
Select: Go to Shopping Cart