1986-92 Mazda RX-7 Performance Parts : Suspension Spring Sets

 : Suspension - Spring Sets : Spring Set 86-91 RX-7 - Coupe

Spring Set
86-91 RX-7 - Coupe

Part Number: 14081

Price: $306.90

Qty:

Addtional Photos - Select to Enlarge

Facebook Share

Spring Set
86-91 RX-7 - Coupe

Racing Beat has designed suspension coil springs that are suitable for a street or track use. This complete set of front and rear suspension springs were designed specifically for the 1986-91 RX-7 (except convertible) by Racing Beat's engineering staff. Ideally suited for use with either the OEM shocks, or your favorite aftermarket units, these springs interchange exactly with the stock springs on the RX-7.

These springs have been designed with a rate increase of approximately 20% (front - 156 lb/in) and 20% (rear - 128 lb/in) with a modest drop of 1-inch (front and rear).

If your car is still running on the original shocks, it is certainly time to consider a replacement! We do not suggest installing aftermarket performance-based springs on a set of tired high mileage shocks, as this may produce a "springy" and bouncy ride. If you prefer to keep the ride quality of your car more "stock like", you may wish to replace your old shocks with a set of Mazda units, or an equivalent set of aftermarket OEM style replacements. However, if you wish to noticeably improve the handling performance of your car, combine a set of new springs with a set of aftermarket Tokico, KYB, or Koni performance shocks. Although the ride quality will become noticeably firmer, the handling improvements will be a much-welcomed improvement.

Prices shown are for a complete set of four springs.

2 x 14020 - Front spring coupe

2 x 14021 - Rear spring coupe

Prop65Warning

Customers who bought the above item also often bought:

Aluminum Main Pulley - Double Sheave - 74-92 Rotary Engines (All)

Aluminum Main Pulley - Double Sheave - 74-92 Rotary Engines (All)

Racing Beat Aluminum Double Sheave Main Drive Pulley Intended for virtually all 1974-92 12A and 13B rotary engines, the Racing Beat main drive pulley is designed for high performance/RPM street and moderate racing use, slowing the water pump and... Aluminum Main Pulley - Double Sheave - 74-92 Rotary Engines (All)

Fuel Injection Plug Kit - 84-92 RX-7

Fuel Injection Plug Kit - 84-92 RX-7

Designed by Racing Beat, this kit comes complete with machined fuel injector plugs, O-rings, Allen head bolts, and a retention plate. The Fuel Injection Plug Kit fits all 1984-92 13B 6-Port and 1987-91 TURBO II engines and is intended for use when... Fuel Injection Plug Kit - 84-92 RX-7

Rear Suspension Upright Toe Eliminator - 86-92 RX-7

Rear Suspension Upright Toe Eliminator - 86-92 RX-7

Rear Suspension Upright Toe Eliminator - On the 1986-92 RX-7s Mazda introduced the Dynamic Tuned Suspension System (DTSS). DTSS allows each wheel to steer by itself based on how many Gs of cornering force the outside wheel is generating. In stock form,... Rear Suspension Upright Toe Eliminator - 86-92 RX-7

KYB AGX Adjust Shocks- Front Right - 86-92 RX-7

KYB AGX Adjust Shocks- Front Right - 86-92 RX-7

KYB AGX Adjustable Gas Shocks for the 1986-92 RX-7 (Front Right) 733012 Excluding models equipped with electronically controlled suspensions. Note: These performance shocks can be installed on vehicles that are equipped with the optional Electronic... KYB AGX Adjust Shocks- Front Right - 86-92 RX-7

Go to Racing Beat Home Page
Select: Go to Shopping Cart