1993-95 Mazda RX-7 Performance Parts : Clutch/Pressure Plate

 : Clutch/Pressure Plate : Street - Stage 1 Clutch Disc 87-95 RX-7 Turbo

Street - Stage 1 Clutch Disc
87-95 RX-7 Turbo

Part Number: 12508

Price: $228.00

Qty:

Addtional Photos - Select to Enlarge

Facebook Share

Street - Stage 1 Clutch Disc
87-95 RX-7 Turbo

Street Stage 1 Clutch Disc - 240mm OD
1987-95 RX-7 Turbo (Turbo II and FD) 

Proven to be one of our most popular RX-7 turbo performance replacement clutch discs, the Street Stage 1 Disc utilizes flattened marcel springs to reduce flexing, and two rivets per marcel to increase lining strength. The result is a disc that requires a bit more technique when starting, and releases quicker. This disc is suited for high output street engines and works with the stock pressure plate/flywheels or compatible performance (Stage 1) upgrade.

Time Saving Tip: We strongly recommend replacing the RX-7 throw-out bearing during any clutch work to ensure trouble free performance. Also, we recommend replacing the transmission front and rear seal kit when re-installing the transmission to reduce the possibility of leakage.

Safety Note: None of the Racing Beat, Exedy, Mazda OE, or any aftermarket flywheel or clutch replacement components should ever be allowed to exceed 10,500 RPM under any condition. You must use an engine RPM-limiter to prevent excessive RPM. If your engine is capable of exceeding 8,500 RPM we highly recommend the installation of a transmission scatter shield or ballistic blanket. Failure to implement the above may result in serious injury or even death.

Actual disc not shown in photo.

Made in the USAMade in the USA under license by Racing Beat, Inc.
Prop65Warning

Customers who bought the above item also often bought:

Oil Hose Adapter Fitting - 16MM to -10 Hose

Oil Hose Adapter Fitting - 16MM to -10 Hose

We offer the Racing Beat Oil Cooler Hose Adapter Fittings to simplify oil system plumbing. These fittings adapt the 16mm female metric threads in the 1971-95 rotary engine front cover and 1971-85 oil cooler (stock or factory race version) to accept -10... Oil Hose Adapter Fitting - 16MM to -10 Hose

Aluminum Alternator Pulley -Double Sheave - 74-92 Rotary Engines (All)

Aluminum Alternator Pulley -Double Sheave - 74-92 Rotary Engines (All)

Double Sheave Aluminum Alternator Pulley 74-92 Rotary Engines (All) The Racing Beat-designed alternator pulley reduces alternator RPM approximately 20% from stock RPM, and is intended for high performance and moderate race use. It is compatible with... Aluminum Alternator Pulley -Double Sheave - 74-92 Rotary Engines (All)

Rotor Oil Filler Cap

Rotor Oil Filler Cap

The Racing Beat-designed and manufactured Rotor Oil Filler Cap fits All Mazda 12A and 13B Rotary Engines Except: 1993-95 RX-7, 2004-08 Auto-trans RX-8, 2009 RX-8 ALL) Yes, we know that there are many "rotor shaped" oil caps available on... Rotor Oil Filler Cap

Race Apex Seal Spring - 86-92 Non-Turbo

Race Apex Seal Spring - 86-92 Non-Turbo

Our Racing Beat Race Apex Seal Springs, specifically designed to fit the underside of our 1986-92 Non-Turbo (2mm) Race Apex Seals, provide proper pre-loading for these lighter one-piece seals. Unlike the stock inner and outer dual apex seal spring... Race Apex Seal Spring - 86-92 Non-Turbo

Go to Racing Beat Home Page
Select: Go to Shopping Cart