1993-95 Mazda RX-7 Performance Parts : Flywheels

RX-7/RX-8 Flywheel - Aluminum :: 87-95 RX-7 Turbo / RX-8

Racing Beat-designed RX-7 flywheels are both engineered and manufactured by Racing Beat for a wide variety of rotary performance applications. This Racing Beat Aluminum Flywheel can be used on all 1987-95 RX-7 13B turbo engine and all ... »more

Part Number: 11435
Our Price $550.00 ADD »

Exedy RX-7/RX-8 Flywheel - Steel :: 87-95 RX-7 Turbo/RX-8

This beautiful Exedy Lightweight Steel Flywheel can be used on all 1987-95 RX-7 13B turbo engines, and all 2004-2011 RX-8 applications. This RX-7 flywheel is compatible with all 240mm Mazda Factory and most aftermarket clutch discs. Note: The ... »more

Part Number: 11438
~~Reg. Price $748.40~~
Sale Price $700.00 ADD »

Replacement Friction Plate :: RX-8/RX-7 Turbo

The Racing Beat-manufactured Replacement Friction Plate is intended to replace the worn or damaged 240mm OD friction plate on all 1987-95 Turbo RX-7 and RX-8 Racing Beat Aluminum Flywheels. (Compatible with Racing Beat flywheels only.) Simply unbolt the ... »more

Part Number: 11432
Our Price $127.34 ADD »

Aluminum Flywheel Mounting Hardware Kit :: 87-95 RX-8 / RX-8

This kit contains the required hardware to mount a Racing Beat Aluminum Flywheel to any 1987-91 Turbo II, 1993-95 RX-7, or 2004-2011 RX-8 Renesis engine. The kit also includes the small spacers required for mating the pressure plate to the ... »more

Part Number: 95193
Our Price $25.47 ADD »

Rear Counterweight :: 89-95 All

Rear Counterweight - 1989-95 13B ALL Engines - All automatic transmission-configured Mazda rotary engines are equipped with a rear counterweight as shown. The counterweight serves as both a critical engine balancing component and as an attachment ... »more

Part Number: 11466
Our Price $226.87 ADD »

Stock Flywheel Puller Tool

The Stock Flywheel Puller Tool will remove any stock Mazda flywheel from its taper press fit on the eccentric shaft once the flywheel nut is loosened. This easy-to-use tool is a "must have" for any serious rotary mechanic! »more

Part Number: 22002
Our Price $58.21 ADD »

Auto Transmission Counter Weight Puller Tool

The Automatic Transmission Counter Balance Weight Puller Tool will remove any automatic transmission balance weight from its taper press fit on the eccentric shaft once the flywheel nut is loosened. This is the same balance weight used with all our ... »more

Part Number: 22003
Our Price $50.94 MORE INFO »

Flywheel Stopper Bar Tool

The Flywheel Stopper Bar Tool is normally required whenever the rotary engine flywheel retaining nut is being removed or installed. The Racing Beat Stopper Bar bolts to either the stock flywheel, the Racing Beat Flywheel, or equivalent (except Tilton) and... »more

Part Number: 22001
Our Price $38.81 ADD »

Flywheel Nut Wrench Tool

Having the correct tool always makes the job seem easy, right? Although you probably won't be using this tool much, it will certainly pay for itself even if you only use it once! The Flywheel Nut Wrench tool is used to remove or install the 54mm (2.... »more

Part Number: 22000
Our Price $58.21 ADD »

Tubular Dowel Puller Tool

The Tubular Dowel Puller Tool allows easy removal of the four tubular dowels used to align the engine housings. In some instances, these dowels can be removed by hand, but this inexpensive tool facilitates the task. »more

Part Number: 22004
Our Price $21.83 ADD »