
1993-95 Mazda RX-7 Performance Parts : Flywheels
Customers who bought the above item also often bought:

Flywheel Stopper Bar Tool
The Flywheel Stopper Bar Tool is normally required whenever the rotary engine flywheel retaining nut is being removed or installed. The Racing Beat Stopper Bar bolts to either the stock flywheel, the Racing Beat Flywheel, or equivalent (except Tilton) and...

Stock Flywheel Puller Tool
The Stock Flywheel Puller Tool will remove any stock Mazda flywheel from its taper press fit on the eccentric shaft once the flywheel nut is loosened. This easy-to-use tool is a "must have" for any serious rotary mechanic!

Tubular Dowel Puller Tool
The Tubular Dowel Puller Tool allows easy removal of the four tubular dowels used to align the engine housings. In some instances, these dowels can be removed by hand, but this inexpensive tool facilitates the task.

Auto Transmission Counter Weight Puller Tool
The Automatic Transmission Counter Balance Weight Puller Tool will remove any automatic transmission balance weight from its taper press fit on the eccentric shaft once the flywheel nut is loosened. This is the same balance weight used with all our...