1993-95 Mazda RX-7 Performance Parts : Engine Porting & Assembly Tools

 : Engine - Porting & Assembly  Tools : Carbide Cutting Tool C Water Jacket Mod

Carbide Cutting Tool C
Water Jacket Mod

Part Number: 22102

Price: $35.00

Qty:

Addtional Photos - Select to Enlarge

Carbide Cutting Tool C
Water Jacket Mod

This carbide cutting tool has the following specifications:
Shank Diameter: 1/8"
Shank Length: 3"
Cutter Diameter: 3/16"
Cutter Length: 3/16"

We've taken the guess work out of selecting the appropriate cutting and grinding tools to undertake your engine porting effort. In this section of our web catalog we offer a wide selection of tools that you can select from; refer to the following guide for the quantity and type of cutting tools that are required for a specific porting application. Grinding Tool Application Guide. These select tools are the same tools that the Racing Beat technicians use to perform the various porting tasks required in development of racing and prototype engines. Selected to provide optimum efficiency for use in your porting efforts, each cutting tool is top-quality, quick-cutting and can be resharpened after extended use. When using a cutting tool you MUST use an appropriate cutting lubricant (i.e. Saw Wax) or damage to the cutting tool will occur.

Prop65Warning

Customers who bought the above item also often bought:

Grinding Stone - Cylindrical Shape

Grinding Stone - Cylindrical Shape

This grinding stone has the following specifications: Grinding stone (cylindrical) 1/4" shank diameter by 2 1/2" overall length (stone 5/8" diameter by 1" length). We've taken the guess work out of selecting the appropriate... »more
Price: $6.00 ADD »

Carbide Cutting Tool G - Intake/Exhaust Porting

Carbide Cutting Tool G - Intake/Exhaust Porting

This carbide cutting tool has the following specifications: Shank Diameter: 1/4" Shank Length: 2" Cutter Diameter: 1/2" Cutter Length: 7/8" We've taken the guess work out of selecting the appropriate cutting and... »more
Price: $41.00 ADD »

Grinding Stone - Ball Shape

Grinding Stone - Ball Shape

This grinding stone has the following specifications: Grinding stone (ball-shaped) 1/8" shank diameter by 3 1/2" overall length (stone 1/2" diameter). Our experience has shown that an average of four (4) grinding stones are required... »more
Price: $5.00 ADD »

Sandpaper Roll 1/2-inch OD - 80 Rough Grit

Sandpaper Roll 1/2-inch OD - 80 Rough Grit

Sandpaper Roll - 80 grit (rough), 1/2" OD x 1.5" L - This sandpaper roll is intended for use with both the long and short mandrels that we offer. We've taken the guess work out of selecting the appropriate cutting and grinding tools to... »more
Price: $0.95 ADD »

Go to Racing Beat Home Page
Select: Go to Shopping Cart